S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 1 DRAWING YOUR ATTENTION Thank you purchasing this VCP, develloped to provide advanced features and functions for high quality performance. To obtain the best results and to avoid malfunction, PLEASE CAREFULLY READ THE DESCRIPTIONS AND OPERATING PROCEDURE CONTAINED IN THIS OWNER’S MANUAL PRIOR TO OPERATING THIS VCP.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 2 IMPORTANT SAFEGUARDS For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions, and instructions on the appliance, or the ones described in the operating instructions and adhere to them.
Page 4
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 3 Water and Moisture–Do not use powerline Ventilation–The slots and openings in the cabinet Portable Cart Warning–An appliance and cart operated sets near water-for example, near a are provided for necessary ventilation. To ensure combination should be moved with care.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 4 –Never place the set in a confined space such as a Power-Cord Protection–Route the power cord in –Do not place the set over a radiator or heat bookcase, or built-in cabinet unless proper order not to be walked on or pinched by items register, or where it is exposed to direct sunlight.
Page 6
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 5 SERVICE Damage Requiring Service–Unplug the set from –If the set has been subjected to excessive shock Servicing–Do not attempt to service the set the wall outlet and refer servicing to qualified by being dropped, or the cabinet has been...
Page 7
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 6 IMPORTANT NOTES • Audio-visual material may include works of copyright which must NOT be recorded without the authority of the owner of copyright. • Note that main voltage is supplied to the unit whenever the main plug is connected to the supply socket.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 8 INTRODUCTION CONGRATULATIONS on your purchase of a new VHS VCP. This VCP is an existing, new VCP designed to satisfy all your VHS tape play and recording needs. And, with proper used and care, your new VCP will offer many year of viewing enjoyment.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 9 TABLE OF CONTENTS NOTE: This Video Cassette Player is compatible with any Video Cassette Player bearing the VHS mark. The VCP is designed to expand your opportunities for home viewing and not for any usage which might violate the copyright laws.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 10 IDENTIFICATION FRONT PANEL CAUTION: Standby key won’t be used CASSETTE COMPARTMENT to turn on (or off) the main power. RECORD KEY STANDBY KEY PLAYBACK KEY STOP/EJECT KEY REWINDING/REVIEW KEY FAST FORWARDING/CUE KEY...
Page 12
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 11 IDENTIFICATION (continued) FRONT PANEL DISPLAY Turned on : color is red Slow Turned off : color is green Record Tape Loading Record Pause Playback , REPEAT Auto Repeat Fast forward Stop “...
Page 13
S137W- BG/D(LENCO) 0.10.6 9:42 AM ˘ ` 12 IDENTIFICATION (continued) REAR PANEL RF OUT TERMINAL ANT IN TERMINAL AC POWER CORD (Connect the TV antenna to (Connect to the antenna terminal of the TV receiver through the RF cable (provided))
Page 14
S137W- BG/D(LENCO) 0.10.6 10:48 AM ˘ ` 13 REMOTE CONTROL OPERATION RANGE 1. Any object between the remote control and VCP will block the path of beam when it is being used. Dark walls, direct sunshine or very bright (incandescent) light will reduce the remote control sensitivity.
Page 15
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 14 BATTERY INSTALLATION 1. Remove the battery cover on the reverse side of the remote control. 2. Install 2 batteries (“AAA” size) into the remote control. (Carefully install batteries to match the polarity diagrams) 3 Close the battery cover.
Page 16
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 15 IDENTIFICATION (continued) REMOTE CONTROL BASIC FUNCTIONS TV/VCR(Not used) POWER-TURN ON/OFF ENCORE AUTO REPEAT EJECT SLOW +/- PAUSE/STILL FRAME PLAYBACK REWIND/REVIEW FAST FORWARD/CUE STOP RETRACKING TRACKING –/+ PAL/NTSC RF OUTPUT SELECTION RECORD SPEED...
Page 17
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 16 WHEN YOU USE THE REMOTE CONTROL • Do not press two keys at the same time. • Do not expose the remote sensor to the sunshine. • It causes the VCP not to operate.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 17 TO GET STARTED ANTENNA CONNECTION 1. Remove the Antenna Cable from the TV set. Connect it to the “ANT.IN” terminal of the VCP. 2. Connect one end of the RF cable to the “RF.OUT” terminal of the VCP.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 18 VIDEO CHANNEL SETTING The built-in RF converter permits playback of video and The converter channel of all units is set to UHF channel audio recordings through a TV receiver. The signals from 36 prior to shipment.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 19 BASIC OPERATION CASSETTE LOADING/UNLOADING LOADING UNLOADING Œ Push the cassette into the cassette compartment Œ Press the STOP/EJECT key twice on the VCP (in the gently. PLAYBACK mode) or press EJECT key once on the (Arrow mark at the top) remote control.
Page 21
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 20 BASIC OPERATION (continued) ERASURE PROTECTION Video cassettes are equipped with a safety tab to prevent accidental erasure. When the tab is removed, recording can not be performed. • TO PREVENT ACCIDENTAL ERASURE •...
Page 22
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 21 BASIC OPERATION (continued) BASIC PLAYBACK Each key of remote control functions identically with the keys on the front panel. NOTE : This VCP has Full Auto Function. If the cassette without the safety tab is inserted, the VCP will operate automatically: “TURN ON...
Page 23
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 22 BASIC OPERATION (continued) Œ LOADING ´ PLAYBACK ˇ STOP POWER STOP/ EJECT PLAY Press the PLAY key, then pictures <Remote Control> <Front Panel> will appear within 1 second and The power is on automatically PLAY indicator will display.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 23 SPECIAL OPERATION The VCP enters into the PLAYBACK mode during special operations as soon as pressing the PLAY key. ˇ ¨ Œ ´...
Page 25
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 24 SPECIAL OPERATION (continued) Œ TO VISUALLY SEARCH FORWARD ´ TO VISUALLY SEARCH REVERSE • Press the REW key once in the PLAYBACK mode. • Press the FF key once in the PLAYBACK mode.
Page 26
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 25 SPECIAL OPERATION (continued) AUTO REPEAT If you press the A.REPEAT key during playback, the tape will be re-playback after rewinding. AUTO REPEAT In the A.REPEAT mode, only A.REPEAT and key will be ENCORE operated.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 26 PICTURE ADJUSTMENT AUTO TRACKING ADJUSTMENT • Since this VCP has the Auto Tracking Adjustment function, it can play clear pictures without special operations. • Auto Tracking Adjustment operates automatically when the cassette is inserted.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 27 VIDEO SYSTEM RECORDING / PLAYBACK VIDEO SYSTEM • RECORDING This VCP is possible to record not only PAL signal, but NTSC. This VCP select the system automatically according to the input signal (PAL or NTSC) in the record mode.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 28 RECORDING TV PROGRAMS Since this VCP has no its own TUNER, this has no function to receive TV broadcasting signals. To record TV programs, please use the another TV or VCP having the function to receive TV broadcasting signals with own TUNER.
Page 30
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 29 OPERATION ´ ˆ ¨ Œ PREPARATION (TV) ´ LOADING ˇ SPEED SELECTION ¨ RECORDING ˆ STOP Turn on the TV and select Insert a blank cassette Press the REC key. To finish the recording...
Page 31
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 30 2.INDIRECT RECORDING (BY VCR WITH TUNER) CONNECTION • Connect the Phone A/V jack on the another VCP set to the Phone A/V jack on the rear of VCP by using Phone cable.
Page 32
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 31 OPERATION ´ ¨ ˆ Œ PREPARATION (TV) ´ LOADING ˇ SPEED SELECTION ¨ RECORDING ˆ STOP Insert the original tape to Turn on the power of Press the SPEED key to Press the PLAY key on the To interrupt the playback VCP.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 32 BEFORE CALLING SERVICE PERSONNEL Before calling service personnel, check the following points for a possible cause of the trouble. A minor adjustment on your part may eliminate the trouble. SYMPTOMS POSSIBLE CAUSES There is no power to the VCP.
S137W- BG/D(LENCO) 0.10.4 10:39 AM ˘ ` 33 SPECIFICATIONS General Power requirement AC 90-250V~, 50/60Hz Power consumption 14 Watt Weight 3.5 kg Temperature Operating: 5°C to 35°C Storage: –20°C to 60°C Tape deck section Format VHS standard Video signal system PAL /MESECAM /NTSC (3.58) color signal...