AEG FAVORIT 44630 Operating Instructions Manual page 28

Symptom
The machine is noisy
The door is difficult
to close
Visible lime deposits or
white film on the dishes
The dishes are not
quite dry
The dishes are not clean
(poor wash)
Once the checks have been carried out switch on the dishwasher and start a washing
programme, if the fault code reappears in the digital display, contact your local
Service Force Centre.
28
Fault code Solution
Dishes are rattling against each other.
Refer to "Loading cutlery and dishes".
The spray arms are knocking against
the dishes.
Refer to "Loading cutlery and dishes".
The dishwasher is not level, or not.
properly built-in.
Check that there is salt and that the
salt cap is tight.
Check that the right level of the
water softener is set.
The rinse aid has run out or too little
is being used.
The baskets are too full.
The dishes have not been arranged
properly.
The spray arms do not rotate.
The spray arms are clogged.
The filters are clogged.
The filters are not in right position.
Not enough detergent has been used
or it is unsuitable.
The detergent is too old or has gone
hard.
The salt container cap is not properly
closed.
The washing programme selected is
too gentle.