At The End Of The Washing Programme - AEG FAVORIT 44630 Operating Instructions Manual

It is possible to interrupt the programme by:
opening the door
pressing the On/Off push button (in this case all the indicator lights turn off)
Close the door again or press the On/Off, the programme will start from the
point in which it was interrupted.
8b. Setting and starting the programme with "Delay Start"
The setting of the delay start occurs before selecting the programme.
Select the desired time (3, 6 or 9 hours) by pressing the "Delay Start" push
button until the indicator light corresponding to the chosen hours flashes.
Press the push button corresponding to the required programme: the indicator
light corresponding to the programme illuminates and the phase indicator
lights for that programme start flashing.
The start of the countdown will occur after about 6 seconds from the last
pressure of a push button.
The countdown will decrease with step of 3 hours and you are informed of this
by the indicator lights of the "Delay Start".
During the countdown the only indicator lights illuminated are the programme
light and the light of the number of hours to the start of the programme.
Once the delayed time has elapsed the programme will start automatically.
It is possible to stop a countdown in progress or before it starts, simply pressing
the "Delay Start" push button until the indicator lights of the hours are off.
9. To cancel a programme in progress
A programme in progress can be cancelled at any time.
Press for about 3 seconds the push button of the running programme until all
indicator lights are off.
Only the On/Off indicator light will remain on once the programme has been
cancelled.
It is now possible to select a new washing programme.

10. At the end of the washing programme

The dishwasher will automatically stop and the phase indicator light "end of
programme" will come on.
The indicator light of the programme just ended will remain on.
The dishwasher has finished the programme ONLY when the "end of
programme" indicator light is illuminated.
If you do not wait for the end of the programme it will not be possible to start
a new programme if first you do not cancel the previous. (For instructions on
how to cancel a programme see point 9).
23