Frigidaire 318200138 (0610) Instruction Manual page 5

Consumer Defined Controls
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL Broil and CLEAN
can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display
in Fahrenheit. Note: both ovens will be changed at the same time.
INSTRUCTIONS
To change display from Fahrenheit to Celsius
or Celsius to Fahrenheit
1. Press Broil and hold for 6 seconds. A beep will sound,
"---" will appear "UPPER" and "BROIL" will flash in the
display (Fig. 1). After 6 seconds a beep will be heard
and "F" (Fig. 2) or "C" (Fig. 3) will appear in the
display.
If "F" appears, the display is set to show temperatures
in Fahrenheit (Fig. 2). If "C" appears, the display is set
to show temperatures in Celsius (Fig. 3).
2. Press to switch between Fahrenheit or Celsius
Clean
display modes. The display will show either "F" (Fig. 2)
or "C" (Fig. 3).
START
3. Press to accept the change or press
reject the change.
(continued)
pads control the Fahrenheit or Celsius temperature display modes. The oven control
Clean
Clear
to
/Off
PRESS
Broil for 6 seconds
Clean
Clear
START
or
/Off
5
DISPLAY
UPPER WARM CONV UPPER LOWER CONV
ROAST BAKE BROIL TIMER DOOR CLEAN BROIL
LOCKED DELAY TIMED REMOVE RACKS TIMED
Fig. 1
Fig. 2
Fig. 3
WARM LOWER LOWER
BAKE ROAST
DELAY DELAY LOCKED LOCKED