Using The New Internet Connection - NEC GPRS Dial Up User Manual

Windows me

Table of Contents

Using the New Internet Connection

Each time that you want to use the AT&T GPRS connection:

1. Check the NEC Wireless Phone's battery level icon in the status bar of the Idle screen

for sufficient charge. The USB cable does not charge the phone's battery.

2. Insert the computer end of the USB cable into the computer's USB port. Always use

the same computer USB port.

3. Gently squeeze the release clips on each side of the USB plug and insert it into the

adapter port of the NEC Wireless Phone.

• Be sure that the rectangular opening on the connection is lined up with the

rectangular opening in the wireless phone. The plug will slide easily into the

opening. DO NOT FORCE THE PLUG!

4. Press the

5. Double-click on the connection shortcut icon on the desktop or go to Dial-Up

Networking, and select the connection name.

6. Click Connect to establish an active connection to AT&T Wireless GPRS service.

Verify that the NEC Wireless Phone's GPRS icon displays in the status bar of the

phone's Idle screen to show a connection has been made.

have more than one browser open on your computer at a time.

NOTE: Other Internet browsers (such as Netscape Navigator) may work, but they have

not been tested and are not supported by NEC.

(End/On-Off) key to power-on the NEC Wireless Phone.

Table of Contents