Advertisement
Quick Links
Optimus 4-Inch Flush-Mount Speaker System
(120-1746)
CHOOSING A LOCATION
For the best performance, install these speakers on a solid, firm surface
that does not vibrate at high volume levels.
speakers in the door panels or the rear deck.
NOTE:
Cardboard or fiber panels are not good mounting surfaces.
As you are deciding on a location, carefully inspect the area behind the
proposed mounting surface.
There must be a clear unobstructed area of at least 2 inches (50.8 mm)
behind the panel.
If it is a door location, check to be sure the window, window mechanism
and window handle will clear the speaker.
NOTE:
Make sure the window opens and closes properly.
Preparation
Faxback Doc. # 34216
We recommend you mount the
Advertisement
Related Manuals for Optimus 4-Inch Flush-Mount Speaker System
Summary of Contents for Optimus 4-Inch Flush-Mount Speaker System
- Page 1 Optimus 4-Inch Flush-Mount Speaker System (120-1746) Preparation Faxback Doc. # 34216 CHOOSING A LOCATION For the best performance, install these speakers on a solid, firm surface that does not vibrate at high volume levels. We recommend you mount the speakers in the door panels or the rear deck.
- Page 2 Optimus 4-Inch Flush-Mount Speaker System (120-1746) Installation Faxback Doc. # 34217 INSTALLING THE SPEAKERS Use the supplied template to mark the speaker opening and the mounting screw hole locations. Cut out the marked speaker opening in the mounting surface. NOTE:...
- Page 3 Remove the grille from each speaker's mounting bracket to expose the mounting holes. Place the mounting bracket on the speaker. Align each speaker's mounting holes and the mounting bracket's holes with the holes on the speed clips, thread a supplied screw through each mounting hole, and tighten all screws until they are secure.
- Page 4 Optimus 4-Inch Flush-Mount Speaker System (120-1746) Specification Faxback Doc. # 34218 Speaker Size: Woofer: ........4 Inch (102 mm) Dual Cone Woofer, Cone: ............Paper Sub Cone: ............Paper Grille: ............Hi Heat ABS S.P.L.: ............89 dB Barium Magnet Weight: ...... 70 x 32 x 10, 5.4 oz (1/8 kg) Maximum Power: ..........