Download Print this page

Optimus XTS 20AV Owner's Manual

2-way satellite swivel speaker system

Advertisement

Quick Links

40-2086.fm Page 1 Thursday, July 1, 1999 12:23 PM
XTS 20AV 2-Way Satellite Swivel Speaker System
Your Optimus XTS 20AV 2-Way Satel-
lite Swivel Speaker System delivers
big sound from a small package! The
innovative dual speaker design lets
you swivel the top speaker for a
smooth mix of direct and reflected
sound.
Your speakers are ideal as part of a
home surround-sound system, and
are magnetically shielded so you can
place them next to your TV or comput-
er display without interference.

SPEAKER PLACEMENT

For the best sound:
• Place the speakers so the dis-
tance between them is about the
same as the distance between the
listening area and a point halfway
between the speakers.
• Avoid floor locations. (Floor cover-
ings can absorb sound.)
Flat Surface Mounting
The ideal location is on a table or shelf
positioned near the corner of a room.
A shelf attached to a wooden wall (or
other acoustically hard surface) great-
ly reinforces the sound.
Optimus and RadioShack are registered trademarks used by Tandy Corporation.
Note: If possible, place the front edge of
the speakers flush with the front edge of
the shelf.
Wall Mounting
The mounting holes on the back of the
speakers let you mount the speakers on
a wall bracket or stand (available at your
local RadioShack store).
CONNECTIONS
Your local RadioShack store has a wide
selection of speaker wire. We recom-
mend you use color-coded or marked
wire to help you correctly connect the
wire. Most color-coded wires have a
stripe running down one of the conduc-
tors and marked wires have ridges along
one of the conductors.
©
1999 Tandy Corporation.
All Rights Reserved.
Cat. No. 40-2086

Advertisement

loading

Summary of Contents for Optimus XTS 20AV

  • Page 1: Speaker Placement

    A shelf attached to a wooden wall (or tors and marked wires have ridges along other acoustically hard surface) great- one of the conductors. ly reinforces the sound. © 1999 Tandy Corporation. All Rights Reserved. Optimus and RadioShack are registered trademarks used by Tandy Corporation.
  • Page 2 40-2086.fm Page 2 Thursday, July 1, 1999 12:23 PM With the speakers placed in the selected 3. Press the right speaker’s red (posi- locations, route the speaker wire from tive) terminal tab and insert one of each speaker to the receiver/amplifier. the wire ends.
  • Page 3 40-2086.fm Page 3 Thursday, July 1, 1999 12:23 PM CARE • For more direct sounds, swivel the top speaker inward so it points di- rectly toward the listening area. To enjoy your speaker system for a long time: • Keep the speaker system dry. If it gets wet, wipe it dry immediately.
  • Page 4: Specifications

    40-2086.fm Page 4 Thursday, July 1, 1999 12:23 PM SPECIFICATIONS Frequency Response ................170-20,000 Hz Power Handling ..................50 Watts RMS Maximum Power................... 100 Watts Impedance ...................... 8 Ohms Speaker Complement ..........(Woofer) 3 -inch Paper Cone (Tweeter) 2 -inch Paper Cone Dimensions (HWD) ..............8 x 6 Inches (203 X 102 X 152 mm)

This manual is also suitable for:

40-2086