Dubbing A Cassette Tape - Optimus SYSTEM 740 Owner's Manual

13-1287.fm Page 12 Wednesday, July 14, 1999 5:56 PM

Dubbing a Cassette Tape

You can dub at the tape's normal play-
ing speed or at twice the normal
speed.
1. Load the cassette you want to
copy into TAPE 2 with the side
you want to record facing you.
2. Load a blank cassette (or one you
want to record over) into TAPE 1
with the side you want to record
on facing you.
3. Press .
TAPE
4. Set to
DUBBING
twice the normal speed, or to
to dub at normal speed.
NORMAL
Illus
Note: Normal speed dubbing pro-
duces the best quality recording.
5. Press then
PAUSE
TAPE 1.
RECORD
down.
6. Press on TAPE 2. TAPE 1
PLAY
automatically releases
and dubbing begins from TAPE 2
to TAPE 1.
12
to dub at
HIGH
on
RECORD
and lock
PLAY
,
PAUSE
Notes:
• To skip an unwanted section
during normal-speed dubbing,
press on TAPE 1 while
PAUSE
the unwanted section plays. To
resume dubbing, press
again.
• To temporarily stop recording,
press on both tape
PAUSE
decks. Press
PAUSE
resume recording.
• To monitor the tape while it is
dubbing, adjust
comfortable listening level. If
you monitor the tape while high-
speed dubbing, you hear a dis-
torted sound.
7. Dubbing stops automatically when
the cassette in TAPE 1 reaches its
end. If the cassette in TAPE 2
continues to play, press
.
EJECT
To stop dubbing before TAPE 1
stops automatically, press
on both TAPE 1 and TAPE
EJECT
2.
PAUSE
again to
to a
VOLUME
STOP/
STOP/