Optimus 114 Owner's Manual page 22

16-551.fm Page 22 Tuesday, July 20, 1999 5:13 PM
CABLE BOX
BRAND
Realistic 44, 51, 88
Regal 14, 41
Regency 28
Rembrandt 29, 32, 39, 42, 44, 88
Samsung 32, 40, 42, 78, 94
Scientific Atlanta 08, 09, 56, 61, 87, 90
Sheritech 27
SL Marx 32, 40, 42, 78, 94
Sprucer 16, 17, 101
Stargate 04, 30, 32, 40, 42, 44,
52, 63, 78, 85, 88, 94
Sylvania 19
Teknika 74
Telecaption 77, 92
Teleview 32, 40, 42, 78, 94
Texscan 18, 19
Tocom 01, 33, 34, 42, 48, 49,
91
Toshiba 36
Uniden Satellite 65, 69
Unika 01, 29, 44, 88, 91
Universal 42, 43, 44, 52, 63, 88
Viewstar 13, 20, 22, 26, 40, 58,
62, 98
Videoway 07, 23, 50
Vid Tech 64
Vidter 64
Zenith 07, 23, 50
2. While holding down
number for your TV using the number but-
tons. Or, while holding down
the code number for your cable box using
the numbered buttons.
22
CODE
To use the VCR's remote control, press the
button for the device you want to control —
CATV
button.
Notes:
, enter the code
TV
, enter
CATV
Precede a single-digit code number with a
0 — for example, 01, 02, etc. To enter a
three-digit number, press
the second and third digits in the code
number.
3. Try operating your TV or cable box using
the VCR's remote control. First press
, then try pressing
CATV
s or t, and for TV operation; or
VOL +/–
and s or t for cable box opera-
POWER CH
tion.
If the device does not function, repeat Step
2 and try other codes for the manufacturer.
If it still does not function, you must use the
original remote control supplied with your
TV or cable box.
, or . Then press the desired function
VCR
• The codes you programmed might be
erased if you remove the batteries from the
remote control (to replace them, for exam-
ple). If this happens, re-enter the codes
after you replace the batteries.
• Some TVs and cable boxes might require
that you manually turn on the power for
that device.
• Your TV or cable box might have functions
that the VCR's remote control will not oper-
ate.
• You can use the number buttons to select a
channel number on your TV and cable box.
However, some TVs/cable boxes might
require that you press
entering the channel number.
• works to adjust the TV volume in
VOL +/–
any operation mode (VCR, TV, or CATV).
, then enter
100
or
TV
, ,
POWER INPUT CH
,
TV
after
DISP/ENT