Elm Schema Properties - Oracle Retail Place 12.2 Installation Manual

Table 5–12 Plan Front End Database Properties
Parameter
database.plandb.oracle.create
database.plandb.oracle.upgrade

ELM Schema Properties

The ELM Schema properties enable you to specify the connection and authentication
parameters for the ELM schema in the Place database.
The following table describes the ELM Schema properties:
Table 5–13
Parameter
database.elmdb.oracle.address
database.elmdb.oracle.dbalias
database.elmdb.oracle.dbname
database.elmdb.oracle.dbport
database.elmdb.oracle.auth.elmauth.user
database.elmdb.oracle.auth.elmauth.password
database.elmdb.oracle.elm_main_dblink
SAU User for CE to access ELM and CommonDB
database.elmdb.oracle.auth.sauoracleauth.user
database.elmdb.oracle.auth.sauoracleauth.password Use this parameter to specify the SAU password to connect
database.elmdb.oracle.sau_dblink
database.elmdb.oracle.create
database.elmdb.oracle.upgrade
Description
Use this parameter to indicate that a new Plan database
be created. Valid values are Yes or No.
Use this parameter to indicate that the existing Plan
database be upgraded. Valid values are Yes or No.
ELM Schema Properties
Description
Use this parameter to specify the URL where the ELM
database is installed.
Use this parameter to specify the ELM database alias name.
Use this parameter to specify the ELM database name.
Use this parameter to specify the port to connect to the ELM
database.
Use this parameter to specify the user name to connect to the
ELM database.
Use this parameter to specify the password to connect to the
ELM database.
Use this parameter to specify the database link name for the
ELM schema to access the main database. If they exist in the
same instance, specify none.
Use this parameter to specify the SAU user name to connect
to ELM database.
to the ELM database.
Use this parameter to specify the SAU database link name
for the ELM schema to access the main database. If they exist
in the same instance, specify none.
Use this parameter to indicate that a new ELM database be
created. Valid values are Yes or No.
Use this parameter to indicate that the existing ELM
database be upgraded. Valid values are Yes or No.
Install.properties Parameters Reference
Installing Place 5-21