Setting Up Your Dvd Player; Box Contents; General Connections; General Functions - Packard Bell DVX 460 User Manual

Table of Contents

Available languages

ETTING UP YOUR

Box contents

1. Packard Bell DVX 460 USB DVD player

2. Remote control

3. Remote control Batteries

4. User's Guide & Service Guide

General Connections

Make sure that each device is turned off before connect-

ing.

DVD player and TV set

See also the Quickstart Setup section at the start of this

guide.

Depending on the connectors that are available on your

TV set, you may need additional cable(s). Please check

your TV's documentation for more information.

You may need to use the V V ideo Out and D D Isplay Mode

buttons to set the video output mode correctly.

DVD player and VCR

DVD player and Y Cb/Pb Cr/Pr or SCART

To connect to a TV using HDTV mode (with compatible TV only):

1. Connect the DVD player to your TV set using the Y Cb/Pb Cr/Pr

and YUV connectors.

2. Set the TV to HDTV mode (see your TV's user documentation for

how to do this).

3. Press the remote control Video Out button repeatedly to select

'CVBS+YUV'.

4. Press the 'Progressive Scan' button twice to switch to HDTV

720P mode.

ENERAL

UNCTIONS

Screen display (OSD) - When the unit plays a disc, press the O O SD

button to browse through several options.

For DVD discs - Press the O O SD button repeatedly to show the

remaining time, elapsed time and chapter time.

Press once again to switch off the OSD display.

For DivX, XVID and Mp3 discs - Press the O O SD button repeatedly to

show the elapsed time of a chapter and the remaining chapter time.

Press once again to switch off the OSD display.

Language - Press the L L anguage button to select any of the languages

supported on the disc.