Audio Setup; Preferences Setup - Packard Bell DVX 460 User Manual

Speaker setup
Connecting to an external audio system
Option 1
Option 2
5.1 Channel analog
Stereo amplifier
amplifier audio input
audio input
DVD Player audio DVD Player audio
output (2 channel) output (multi-channel)
Speaker setup includes Downmix, Centre, Rear, Subwoofer, Centre
Delay, Rear Delay and Test Tone.
Downmix - If you have connected a stereo amplifier, you should
select Stereo, if your amplifier is 5.1 please set as OFF.
Centre speaker - Switch the centre speaker ON or OFF.
Rear speaker - Switch the rear speakers ON or OFF.
Subwoofer - Switch the subwoofer ON or OFF.
Centre Delay - Allows the centre speaker output to be delayed.
Rear delay - Allows delaying rear speaker output.
Test tone - Choose the corresponding speaker layout. A test sound
will be sent to each speaker.
Setting up your DVD player
10 -

Audio setup

Option 3
Dolby digital decoder
audio input
Audio out - Selects an audio output mode: Analogue, SPDIF/RAW or
SPDIF/PCM.
or
If your unit doesn't support DTS mode, you should select SPDIF/RAW
or SPDIF/PCM to play DTS discs.
Some models support Dolby AC-3 and DTS. The unit sets the corre-
sponding mode automatically.
OP Mode - Switch between RF and Line Out mode.
DVD Player digital
audio output
Dual Mono - If your amplifier/decoder already supports Dolby
Digital output, you can select Stereo, L-mono, R-mono, MIX-mono
for your amplifier/decoder.
Compression - To adjust the sound dynamic range.
LPCM output - You can select 48k or 96k audio encoding modes.

Preferences setup

Not accessible during display. The Preferences page includes TV
display, TV type, Audio, Subtitle, Disc menu, Local, Parental,
Password and Defaults.
TV display - If you have a widescreen TV (16:9 Aspect Ratio) select
WIDE/HDTV. Use one of the NORMAL options for any other screen
type.
TV Type - The preferred setting in most European countries is PAL.
Audio - Select your preferred language.
Subtitle - Select your preferred language.
Disc menu - Select your preferred language.
Locale - Select your locale.
Parental - Select a level of Parental lock.
Password - The default password is 2001. You can change it using
this option.
Notes:
This unit supports both Dolby digital or analogue audio.