Play From An External Device; Adjust Volume Level - Philips DS8550 User Manual

» If connection is successful. the unit beeps and the indicator turns
on stably.
» If the pairing cannot be completed within one minute, the
indicator flashes slowly.
Tip
•
If your Bluetooth device is already paired with DS8550 before, you just need to find
out the "PHILIPS DS8550" on your Bluetooth menu, then confirm the connection.
To disconnect Bluetooth device,
• Move it beyond the communication range; or
• Press ; or
• Turn off the connected device
Play audio files from bluetooth devices
Note
•
Make sure the Bluetooth connection between the unit and the device is active.
• To start play, press
• To pause/resume play, press
• To track up/down, press forward/backward keys.

Play from an external device

You can also listen to an external audio device through this unit.
1
Press to select Aux-in mode.
2
Connect the supplied Aux-in link cable to:
the AUX IN jack (3.5mm) on the back of the unit.
•
• the headphone jack on an external device.
3
Start to play the device (see the device user manual).

Adjust volume level

1
During play, press VOL +/- to increase/decrease the volume level.
on the remote control.
again.
EN
19