Play From An External Device - Philips DS3400/37 User Manual

Note
•
Do not disconnect power or undock the iPod/iPhone
during the updating process.
Charge the iPod/iPhone
Note
•
If the docking speaker is operated on the batteries, you
cannot charge your iPod/iPhone.
When the docking speaker is connected to
AC power, the docked iPod/iPhone begins to
charge.
Sync iPod/iPhone with PC
Note
•
Make sure that iTunes has been configured properly in
your PC.
1
Insert the iPod/iPhone in the dock.
2
Press to switch to standby mode.
» The LED indicators light off.
8 EN
3
Connect your docking speaker and PC
with a USB cable.
4
Launch iTunes to synchronize your docking
speaker with PC.
» The docked iPod/iPhone is
synchronized with PC successfully
through the iTunes.
Note
•
Due to different materials and product techniques,
some USB cables may not work with this device.

Play from an external device

With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
•
Make sure that there is no audio detected from docking
connector in the speaker.
1
Press to turn the docking speaker on.
2
Connect the MP3 link cable (not supplied)
to:
• the AUDIO-IN socket at the back of
the docking speaker.
• the headphone socket on an external
device.
3
Play audio on the device (see the device's
user manual).