Table of Contents
Advertisement
ADVANCED SETTINGS
38
<BRB1056>
Confirm the entry by pressing the
ton.
The start time will then be highlighted.
Enter the start time.
It is recommended that you enter the start time a few minutes be-
fore the VCR is scheduled to start recording the programme to en-
sure the beginning of the programme is not missed.
The digital receiver uses a 24-hour clock, so set all times in 24-hour
format, such as 2215 for 10:15 pm.
NOTE:
Use the 2 (LEFT) or 3 (RIGHT) buttons to overwrite entry mis-
takes.
Press the
(DOWN) button to confirm the entered
time.
Next, enter the end time.
It is recommended that the end time be set a few minutes after the
VCR is set to stop recording so that the end of the programme is not
missed.
As when setting the start time, use the 24-hour format. Press the
(DOWN) button to confirm the entered time. The entry position will
move to the next line.
Use the 2 (LEFT) or 3 (RIGHT) button to select the
recording interval.
The available options are once only, daily, and weekly.
To record only once, select the 1st option. To record daily at the
same time, select the 2nd option. To record weekly at the same time,
select the 3rd option.
Lastly press the SELECT button to save the set-
tings.
The previous menu will be displayed to allow you to check the set-
tings. To make more settings, repeat the process from Step 3.
To return to regular operation press the EXIT button.
(DOWN) but-
Advertisement
Table of Contents
