Advertisement
Connecting your serial control device to the Serial Server
7.
Make the serial connection from the serial control device to the Serial Server.
a. The LES290A Serial Server comes with a DB25-M to DB9-M cable adapter, making the
LES290A Serial Server a DTE device, which will connect, directly to a DCE DB9-F serial
control device.
b. To connect the LES290A Serial Server to another DB9-M DTE device,
such as a PC serial port, you will need to use a DB26-F to DB9-F null modem cable.
Serial cables and adapters are available from many sources including
8. Connecting the Serial Server to the QVHD
a. If the connection from the LES290A Serial Server to the QVHD is over a network,
connect both devices to convenient hub, router, or switch ports with straight-through
Ethernet cables.
b. If the connection is point to point connecting only the LES290A Serial Server and the
QVHD, use a crossover Ethernet cable.
Notice: BLACK BOX is a registered trademark of Black Box Corporation.
Corporate Headquarters – USA
950 Marina Village Parkway
Alameda, CA 94501
Phone: 510-814-7000
Fax: 510-814-7026
Support@rgb.com
RGB Spectrum, Inc.
Rev. 1 - 8/12/08
RGB Spectrum
www.rgb.com
QuadView HD – Serial Server Set-up
BLACK
BOX.
Corporate Headquarters – Europe
Rootweg 24
5721 VK Asten
The Netherlands
Phone: +32.11.515600
7
Advertisement
