Samsung LED 6300 E-Manual page 36

Unable to connect to the network
Check the following:
11
IP Settings
Check the
21
Enter the correct security key if required.
31
If this does not work, contact your Internet Service Provider for more information.
Connected to a local network, but not to the Internet
11
Make sure that the Internet LAN cable is connected to the router's external LAN port.
21
Check the DNS settings under
31
If the problem persists, contact your Internet Service Provider.
Network setup complete, but unable to connect to the Internet
If the problem persists, contact your Internet Service Provider.
Dynamic versus Static IP Addresses
If the network requires a dynamic IP address, use an ADSL modem or router that supports the
Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically
provide the IP address, subnet mask, gateway and DNS values the TV needs to access the Internet, so
they do not have to be entered manually. Most home networks use a dynamic IP address.
If the network requires a static IP address, enter the IP address, subnet mask, gateway, and DNS values
manually when setting up the network connection. To get the IP address, subnet mask, gateway and
DNS values, contact your Internet Service Provider (ISP).
If the network requires a static IP address, use an ADSL modem that supports DHCP. ADSL modems
that support DHCP also allow static IP addresses.
Try Now
settings.
IP Settings.
Try Now
Try Now