Samsung GALAXY TAB3 User Manual page 126

Scan for Wi-Fi Networks
To make sure you have an accurate list of Wi-Fi networks.
Touch Settings
Add Wi-Fi Network
To open a dialog where you can add a Wi-Fi network by
entering its Network SSID (the name it broadcasts), security
type, and other properties:
1. Touch Settings
Wi-Fi network.
2. Use the keyboard to enter Network SSID.
3. Touch the Security field and then touch a security type.
Note: Depending on the Security protocol used by the WAP,
additional network information may be required, such as
a Password.
4. If necessary, touch Password and enter the password or
hex key.
5. Touch Save.
121
Wi-Fi, and then touch Scan.
Wi-Fi, and then touch Add
Advanced Settings
Set up and manage wireless access points.
1. Touch Settings
2. Touch Menu
The following options display:
• Network notification: Have your device alert you to new
Wireless Access Points (WAPs). Touch Network notification to
turn notifications On or Off. When enabled, a check mark
appears in the check box.
• Keep Wi-Fi on during sleep: Specify when to disconnect from
Wi-Fi.
• Wi-Fi timer: Specify the Starting time and the Ending time
for Wi-Fi to be connected.
• MAC address: View your device's MAC address, which is
required when connecting to some secured networks (not
configurable).
• IP address: View your device's IP address.
Wi-Fi.
Advanced.