Table of Contents
Advertisement
off device to cause the phone to turn off after a specified time interval,
and set the interval. Tap the Done soft key when finished.
– External Power: Tap Turn on backlight to enable the backlight when
a button is pressed. Tap Turn off backlight to disable the backlight
when not used for a specified time interval, and set the interval. Tap
Turn off device to set a time interval for automatic shutoff, and set the
interval. Tap the Done soft key when finished.
– Brightness: Use the slider bar to increase or decrease the display's
brightness. Tap the Auto adjustment option to auto-adjust based on
available light. Tap the Done key when finished.
– Performance: Set the CPU Performance for the device.
•
Buttons: Select functions for some of the phone's buttons.
– Assign a program: Assign a program to the designated buttons. Tap
Button1, Button1 Hold, Button2, and Button2 Hold to assign a
program for each button. Tap Done when finished.
– Wake up: Select the key(s) to press to wake up the device, from Lock
only, Lock or Power or Any Key. Tap Done when finished.
– "X" button: Enable or disable the option of ending of active programs
by tapping the "X" button. Tap Done when finished.
Align Screen: Run the alignment if the screen is not responding
•
accurately to stylus taps. Tap Align screen and follow on screen
prompts. Tap Done when finished.
•
USB Connection: Select a USB function to determine how the phone
functions when attached to the USB port of a PC
– ActiveSync: Use ActiveSync to interface with your Omnia II. When this
option is active, you can also choose to Enable advanced network
functionality.
– Mass storage: Treats your Omnia II's memory as a removable drive on
your PC. Select a primary target, either My Storage or an optional install
Storage Card.
Warning!: To safely disconnect your phone from the PC, right-click the
Safely Remove Hardware icon
bottom right corner of the PC screen, then click Safely Remove
Hardware. In the dialog, choose your device, then click Stop.
– Data connection: Switch to Data Connection settings. For more
information, see Phone Settings ➔ Data Connection on page 142
•
TV Out: Set the TV Out settings:
– Broadcast nation: Select your nation/region.
– Screen ratio: Choose from 4 : 3 or 16 : 9.
– Video quality: Choose from Natural, Sharp, or Soft.
– Brightness: Choose from High, Middle or Low.
– Contrast: Choose from High, Middle or Low.
– Turn off backlight: Select the duration for the backlight.
DivX Registration: View the DivX registration information. Your Omnia
•
II is pre-registered, and the registration information may be needed for
some applications.
GPS: Select the Connection and Location for the GPS application.
•
– Connection: Select GPS program port. Tap Done when finished.
in the PC's system tray at the
Changing Your Settings
141
Advertisement
Table of Contents
