Table of Contents
Advertisement
Installation And User Manual
SCHOTT Solar POLY™ Photovoltaic Modules
SCHOTT POLY™ 230, SCHOTT POLY™ 225,SCHOTT POLY™ 220,
SCHOTT POLY™ 217, SCHOTT POLY™ 210, SCHOTT POLY™ 202,
SCHOTT POLY™ 195
Contents
1.1
1.2
1.3
1.4
1.5
1.6
2.1
2.2
3.1
1
WARNING NOTICES
Danger of Death from Electric Shock
Photovoltaic modules can generate electricity upon exposure to light. The voltage of a
single module is less than 50 VDC, but when connected together in series, the total
voltage can be dangerously high. When connected together in parallel the current is
added together. When handling the module the following must be followed to avoid the
risk of arcing, fire and electric shock.
1.
The installation of PV should only be performed by qualified personnel.
2.
Do not wear metallic jewelry when installing.
3.
Do not install PV modules when wet. Tools must be dry.
4.
Do not use damaged or defective modules. Place all damaged or defective modules
in a carton to avoid exposure to light. Even damaged or defective modules can
produce electricity.
5.
Contact with electrically active parts of a PV module such as terminals, can result in
burns, sparks and lethal shock whether the PV modules are connected or not.
6.
PV systems can produce high voltage and current which could present an increased
hazard and may cause serious injury or death.
7.
Artificial sunlight should not be concentrated upon the PV module. Do not expose
PV modules to sunlight concentrated with mirrors, lenses or other means.
8.
Use appropriate safety equipment (insulated tools, insulated gloves, etc) when
working on any wiring.
3
4
4
5
5
6
6
8
8
9
11
11
3
- Quick Links:
- Table of Contents
- Specifications
Hide quick links:
Advertisement
Table of Contents
