Summary of Contents for SCHOTT Solar Photovoltaic Modules
Page 1
Installation And User Manual SCHOTT Solar Photovoltaic Modules Tips for the installer...
Page 2
Introduction Thank you for choosing a SCHOTT POLY™ photovoltaic (PV) module. SCHOTT Solar is a world leader with over 50 years experience in the production of photovoltaic products. Our prime commitment is to produce quality products that will last for many years.
Danger of Death from Electric Shock The inverter can produce dangerous, high voltage. Be sure to follow all manufacturers’ instructions before installing any PV modules. Use extreme caution when wiring or installing inverter. Be sure to shut down inverter before installing or removing PV modules. Danger of Death from Electric Shock When exposed to light, PV modules produce direct current.
If you are planning to use the PV modules where salt water damage may occur, please consult with SCHOTT Solar to determine an appropriate installation method, or if installation is possible.
Figure 3. For the high load situations shown in Figure 3 an additional center support rail should be used. Note that SCHOTT does not warranty frame clamps. The SCHOTT module warranty may be void if customer-selected frame clamps are improper or inadequate with respect to properties (including strength or material) or installation.
Page 7
Figure 3: Attachment Guidelines – Both Portrait & Landscape Orientations < 33 Ib/Ft < 54 Ib/Ft < 75 Ib/Ft (< 1600 Pa) (< 2600 Pa) (< 3600 Pa) Use all Use all Use all mounting holes mounting holes mounting holes Center Support 1/4 W...
NEC codes. A qualified solar professional should refer to the National Electrical Code 690-7(a) to determine the maximum number of SCHOTT POLY™ modules that can be placed in series. Under normal conditions, a photovoltaic module is likely to experience conditions that produce more current and/or voltage than reported at standard test conditions.
Grounding Methods 1) Grounding Lug with Thread-Cutting Screw at Grounding Hole Select a grounding lug listed for direct burial and outdoor use (tin-plated, solid copper lay-in lug with a stainless-steel set module frame screw) capable of accepting a 4-14 AWG copper conductor, e.g. ILSCO SS #10 External Serrated Washer (e.g.
Page 10
3) Grounding Lug with Machine Screw at Mounting Hole Select a grounding lug listed for direct SS 8-32 Nut burial and outdoor use (tin-plated, solid (e.g. Fastenal 70706) copper lay-in lug with a stainless-steel set screw) capable of accepting a SS #8 Flat Washer (e.g.
MAINTENANCE SCHOTT PV modules are designed for long life and require very little maintenance. If the angle of the PV module is 5 degrees or more, normal rainfall is usually sufficient to keep the module glass surface clean under most weather conditions. If dirt build-up becomes excessive, clean the glass surface only with a soft cloth using water.
Page 12
For further information: SCHOTT Solar Inc. U.S. Sales and Marketing 2260 Lava Ridge Court, Suite Roseville, CA 95661 Toll free: 888-457-6527 Fax: 916-784-9781 Email: info.solar@us.schottsolar.com www.us.schottsolar.com U.S. Production Facility Hawking Drive, SE 5201 Albuquerque, NM 87106...