i-Manual
© 2012 Sony Corporation
Selecting the cable/antenna signal
Steps
1.
Press the HOME button, then select
buttons.
2.
Select
[Channels & Inputs]/[Channels, Inputs & Ginga] using the
the
button.
3.
Select [Cable/Antenna] using the
4.
Select [Cable] or [Antenna] using the
button.
To return to the last viewed source, press the HOME button twice.
Tips
After changing this setting, it is recommended to run [Auto Program].
Top Page
>
Configuring Various Settings
[Settings] at the bottom of the screen using the
/
buttons, then press the
/
buttons to set the received signal, then press the
149
Print
Font Size
> Selecting the cable/antenna signal
/
/
buttons, then press
button.
Top of Page