Sony BRAVIA KDL-55HX751 I-Manual page 131

i-Manual
© 2012 Sony Corporation
Allowing/blocking access from controller
Overview
You can allow or block access from a specified controller.
Steps
1.
Press the HOME button, then select
buttons.
2.
Select [Network] using the
3.
Select [Home Network Setup] using the
4.
Select [Remote Device / Renderer] using the
5.
Select [Renderer Access Control] using the
6.
Select the controller using the
press the button.
7.
Select [Allow] or [Block] using the
Select [Allow] to allow access from the controller. Select [Block] to block access from the
controller.
To return to the last viewed source, press the HOME button twice.
Top Page > Using Home Network (DLNA)
[Settings] at the bottom of the screen using the
/ buttons, then press the
/ buttons, then press the
/ buttons, then press the
/ buttons, then press the
/ buttons to change the access permission setting, then
/ buttons, then press the
131
Print Font Size
> Allowing/blocking access from controller
button.
button.
button.
button.
button.
Top of Page
/