Findnode; Findparentengine; Findprimary - Sun Microsystems iPlanet Integration Server 3.0 Process System Manual

FindNode

The command sets the specified node as the current node.
FindNode
FindNode node_name
Argument Description
The specified node. Must be in same environment as the engine.
node_name
The command is available only for the current engine.
FindNode
The command is normally used to start engine components (using the
FindNode
,
StartGovernor StartDBService

FindParentEngine

The
FindParentEngine
FindParentEngine
The
FindParentEngine
current.
The
FindParentEngine
one of its components is current and you want to make another of its components
current. (The and
Find
when an engine is current.)

FindPrimary

The command sets the primary engine unit for the current engine as
FindPrimary
the current component.
FindPrimary
The command is available only when an engine is current, so you
FindPrimary
must first use the
FindEngine
primary engine unit must also be running.
, and
StartUnit
command makes the component's parent engine current.
command is available only when an engine component is
command is used to navigate to the current engine when
component Script commands are only available
Start
Script command to set the current engine. The
Conductor Script Commands
Script commands).
Appendix A Conductor Script Commands 285