Table of Contents
Advertisement
Installing Adapter for SAP R/3
28
export DISPLAY=<IP address:0.0>
3
To change to the /mnt_point directory, enter:
%cd mnt_point
4
To start the installer, enter:
%./setup
The Installer Welcome window appears.
5
Got to step 3 of the main procedure.
c
On AIX:
1
Mount the CD-ROM.
For example:
pfs_mount <CD DEVICE> /mnt_point
2
Set the IP address:
export DISPLAY=<IP address:0.0>
3
To change to the /mnt_point directory, enter:
%cd mnt_point
4
To start the installer, enter:
%./setup
The Installer Welcome window appears.
5
Got to step 3 of the main procedure.
d
On HP-UX:
1
Mount the CD-ROM.
Some of the files that are being installed might have names
longer than 31 characters or have mixed-case file and directory
names, so you must enter the following mount commands:
nohup pfs_mountd &
nohup pfsd &
pfs_mount <cd device> /mnt_point
2
Set the IP address:
export DISPLAY=<IP address:0.0>
3
To change to the /mnt_point directory, enter:
Adapter for SAP R/3
Advertisement
Table of Contents
