Table of Contents
Advertisement
Converting BAPI Formats
Converting BAPI Formats
14
# example:
# name in 4x database: LEG.I.ORIGINAL_LIMITED_SIZE_NAME
# renamed in 5x database to
# LEG.I.MODIFIED_FORMAT_NAME_OF_LARGER_SIZE
# ToRuleInputMessage=SAP.IC.MATMAS03.ZMATMAS_EXTENSION
# defaults to same name [Optional] or change rule name
# RuleNameOut =
# eof
You must convert the formats for both IDocs and BAPIs when you move
between versions of Adapter for SAP R/3. Custom formats can continue to use
names that begin with user-defined prefixes to differentiate them from standard
formats.
BAPI formats and rules that you used for version 3.8 of the adapter will work
with Adapter for SAP R/3 version 3.9. BAPI formats from version 3.0.3 or
earlier are not supported and should be reloaded using the version 3.9 adapter.
New rules must be created for these formats.
The term New Formatter Database references any database created using
MQSI version 2.0.2, WMQI version 2.1, or e-Biz Integrator versions 3.2x or
3.6x.
The term Old Formatter Database references a database built on earlier
versions of these products.
To use BAPI formats used in pre-3.9 versions
•
Reload all BAPIs into the New Formatter Database.
Note
New Rules must be created for all formats that are reloaded into a
new database.
Adapter for SAP R/3
Advertisement
Table of Contents
