Registering Other Standard Sizes - Toshiba e-STUDIO181 Operator's Manual

3
Press the [COPY] button several times until the lamp of the paper
size you placed in the drawer is lit.
If the [FUNCTION CLEAR] button is pressed at this step, the size is not registered and
the equipment will return to its normal status.
4
Press the [START] button.
The paper size has been registered.

Registering other standard sizes

When standard size paper other than LD, LT, LT-R, LG or ST-R is placed, register this size as
"OTHER" size. Key in the code number of the paper size to register it as "OTHER" size.
See the table below for the code number of each size.
Paper size
A3
A4
A4-R
B4
B5
*1 A5-R and ST-R can be placed only on the bypass tray.
In this section, A4 size is registered in the drawer of the equipment as an example.
1
Press and hold the [COPY] and [DRAWER] buttons simultaneously
for more than two seconds.
"Fnc" appears on the LED display.
Code No. Paper size
01
02
A5-R
03
04
05
Preparation 3 - Registering Size of Paper Placed
Code No.
B5-R 06
*1
07
FOLIO 13
COMP 14
13"LG 16
37