Advertisement
Quick Links
MSR120 Simple Manual
!"
Thank you for purchasing the MSR120 series products. The MSR120 Series USB Interface Magnetic Card Reader is ideal for retail
systems, time keeping systems, security systems and the card reader related systems. The MSR120 series are designed to offer the user
a card reader solution that will complement many applications. Triple track MSR120 reader is uniquely designed to read both credit
cards and Driver Licenses (AAMVA and California standard).
FEATURES
1
Light weight: 120g
2
Compact size: 100L*34W*28H (mm)
3
LED and Buzzer indicators indicate card status
4
Low power consumption
5
Single, dual, or triple track versions allow for reading all types of magnetic cards, including credit cards and drivers licenses.
CONFIGURATION
MSR120-33 Triple track 1&2&3
AGENCY APPROVED
- Comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.
- Comply with CE mark Class A, UL, and cUL
WARRANTY
This product is served under one-year warranty of defects in material and functionality to the original purchasers. Within the warranty
period, if the product found to be defective will be repaired or replaced. This warranty applies to the products only under the normal use
of the original purchasers, and in no circumstances covers incidental or consequential damages through consumers' misuse or
modification of the product.
WARNING
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
SET-UP
1) Turn the system power off.
2) Connect PC and MSR120 USB connector of signal cable to a free USB port
3) Turn the system power on.
4) Install USB driver (ref. to Appendix A)
SPECIFICATIONS
Recording Method: Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA.
Swipe Speed:
5 to 50 in/sec (worst case with +/- 12% jitter card)
Power Requirements:
5VDC/120mA
!" Excerpt from MSR120 Programmer's Manual (PM010, Rev.1.1)
MSR 120 SERIES
Magnetic Stripe Card Reader
Universal Serial Bus (USB) Interface
!" --- Proprietary and Confidential ---
2003/1/21
Page 1 / 5
Advertisement
Related Manuals for Unitech MSR 120 SERIES
Summary of Contents for Unitech MSR 120 SERIES
-
Page 1: Specifications
MSR120 Simple Manual !" 2003/1/21 MSR 120 SERIES Magnetic Stripe Card Reader Universal Serial Bus (USB) Interface Thank you for purchasing the MSR120 series products. The MSR120 Series USB Interface Magnetic Card Reader is ideal for retail systems, time keeping systems, security systems and the card reader related systems. The MSR120 series are designed to offer the user a card reader solution that will complement many applications. -
Page 2: Output Data Format
MSR120 Simple Manual !" 2003/1/21 Communication: Standard USB signal levels (comply with USB specification v 1.1) Operating Temp: - 10!C to + 50!C Storage Temp: -30!C to +70!C Operating Humidity: 10% to 85% relative humidity Magnetic Head Life: 500K swipes Min. 1M option Dimensions: 100mm in L x 34mm in W x 28mm in H Weight:... - Page 3 MSR120 Simple Manual !" 2003/1/21 3. Insert the USB driver diskette (DISK 2) into the floppy drive and click Next to continue: a. Select Search for the best driver for your device and click Next. b. Select Specify a location and click Browse. Change the folder of your floppy drive (i.e.: A:\Driver\Windows) and click OK.
- Page 4 MSR120 Simple Manual !" 2003/1/21 d. Windows will detect the driver (SER9PL.inf) and shows the USB Card Reader. Click Next to continue until installation is complete. e. Click Next to continue and let Windows copy the needed files to your hard disk. Click Finish while installation is complete.
-
Page 5: Driver Un-Installation
MSR120 Simple Manual !" 2003/1/21 !" Driver Un-installation You can uninstall the MSR120 driver by executing Uninstall Program: Dremover98.exe in the driver diskette and click the Remove button to accomplish the un-installation. !" !" Excerpt from MSR120 Programmer’s Manual (PM010, Rev.1.1) Page 5 / 5 !"...