Advertisement
Quick Links
Advertisement
Related Manuals for Sitecom USB to Fast IrDA
Summary of Contents for Sitecom USB to Fast IrDA
- Page 1 User Manual Sitecom USB to Fast IrDA...
-
Page 2: System Requirements
Introduction Thank you for choosing the USB-IrDA adapter. The USB-IrDA is an Infrared adapter that connects to a PC or server via the Universal Serial Bus (USB) port. System Requirements Pentium-class CPU with USB port PC. 1 available USB type A (downstream) port. Windows 98, Windows Me, Windows 2000 or Windows XP operating system. - Page 3 Installation of USB-IrDA on Win98/ME Note : 1. Please install USB-IrDA as the procedure below. If the installation has not been completed, don’t plug the USB-IrDA to your computer. To install the USB-IrDA drivers Please insert the driver disk into floppy disk and execute “...
- Page 4 Click “Next” to continue. Click "Next" to continue.
- Page 5 Click "Next" to continue. For Win 98, please select “KC Technology, Inc.”, and select “ IRXpress USB IrDA Adapter – Windows 98 ”. Click “OK” to continue.
- Page 6 For Win ME, please select “KC Technology, Inc.”, and select “ IRXpress USB IrDA Adapter - Windows Me ”. Click “OK” to continue. Click “Finish”, Windows has finished installing the device.
- Page 7 Select “ Yes, I want to restart my computer now ”. Then click “Finish” to restart the system and complete the device. ◆ After restarting the computer, please plug the flat end of the USB cable into the downstream A connector located in the back of your computer or USB HUB port, and the upstream B connector into the USB-IrDA adapter.
- Page 8 ◆ ◆ ◆ ◆ USB device installed list as following To make sure you have installed successfully, please move the cursor to “My computer” “Control Panel” “System Properties” “Device Manager” ”Infrared devices”. It will show a new direction “IRXpress USB IrDA Adapter“.
- Page 9 And under the same window, you can select ”Network adapters”. It will show “IRXpress USB IrDA Adapter – Windows 98”.
- Page 10 It will show “IRXpress USB IrDA Adapter – Windows Me” on Win ME...
- Page 11 And under the same window, you can select ”Ports [COM & LPT]”. It will show “Virtual Infrared COM Port”.
- Page 12 And under the same window, you can select ”Ports [COM & LPT]”. It will show “Virtual Infrared LPT Port”.
- Page 13 ◆ Uninstallation If you want to remove the driver of USB-IrDA, you can move the cursor to “My computer” “Control Panel” “Add/Remove Programs”. It will show a dialog then select “Install/Uninstall” (1) Select “IRXpress USB-IrDA” from the list. Click “Add/Remove” to uninstall the driver of USB-IrDA.
- Page 14 Click “Yes” to continue. Click “OK” to complete the device’s removal.
- Page 15 Installation of USB-IrDA under Win2000 Note : Please install USB-IrDA as the procedure below. If the installation has not been completed, don’t plug the USB-IrDA to your computer. To install the USB-IrDA drivers Please insert the driver disk into floppy disk and execute “...
- Page 16 Click “Next” to continue. Click "Next" to continue.
- Page 17 Select “Yes, I want to restart my computer now ”, then click “Finish” to restart the system and complete the driver installation. ◆ ◆ ◆ ◆ After restarting the computer, please plug the flat end of the USB cable into the downstream A connector located in the back of your computer or USB HUB port and the upstream B connector into the USB-IrDA...
- Page 18 ◆ ◆ ◆ ◆ USB device installed list as following To make sure you have installed successfully, please move the cursor to “My computer” “Control Panel” “System Properties” “Hardware” “Device Manager” ”Infrared devices”. It will show a new direction “IRXpress USB Infrared Adapter“.
- Page 19 And under the same window, you can select ”Universal Serial Bus controllers”. It will show “ IRXpress USB IrDA Adapter ”.
- Page 20 ◆ Uninstallation If you want to remove the USB-IrDA, you can move the cursor to “My computer” “Control Panel” “Add/Remove Programs”. It will show a dialog then select “Install/Uninstall”. Select “IRXpress USB-IrDA” from the list. - Click “Change/Remove” to uninstall the driver of USB-IrDA.
- Page 21 Click “Yes” to continue. Click “Yes To All” to continue.
- Page 22 Click “Yes” to continue. Click “OK” to complete the device’s removal.
- Page 23 Installation of USB-IrDA under WinXP Note : Please install the USB-IrDA driver at the procedure below. Do not plug the USB-IrDA to your computer if the installation has not yet been completed. To install the USB-IrDA drivers Please insert the driver disk into the Computer’s drive then execute “...
- Page 24 Click “Next” to continue. Click "Next" to continue.
- Page 25 Select “Yes, I want to restart my Computer now”, then click “Finish” to restart the system and complete the driver installation. ◆ ◆ ◆ ◆ After restarting the computer, please plug the flat end of the USB cable into the downstream A connector located in the back of your computer or USB HUB port and the upstream B connector into the...
- Page 26 ◆ ◆ ◆ ◆ USB device installed list as following To make sure you have installed successfully, please move the cursor to “My computer” “Control Panel” “Performance and maintenance” “System” “System Properties” “ Hardware” “Device Manager” ”Infrared devices”. It will show “IRXpress USB Infrared Adapter“.
- Page 27 And under the same window, you can select ”Universal Serial Bus controllers”. It will show “ IRXpress USB IrDA Adapter ”.
- Page 28 ◆ Uninstallation If you want to remove the USB-IrDA, you can move the cursor to “My computer” “Control Panel” “Add/Remove Programs”. It will show a dialog then select “Install/Uninstall”. Select “IRXpress USB-IrDA” from the list. Click “Change/Remove” to uninstall the driver of USB-IrDA.
- Page 29 Click “Yes” to continue. Click “Yes to All” to continue. Click “Yes” to continue.
- Page 30 Click “OK” to complete the device’s removal.
Need help?
Do you have a question about the USB to Fast IrDA and is the answer not in the manual?
Questions and answers