Sitecom CN-516 Full Manual
  1. Manuals
  2. Brands
  3. Sitecom Manuals
  4. Adapter
  5. CN-516
  6. Full manual

Sitecom CN-516 Full Manual

Usb bluetooth adapter
Hide thumbs
Table of Contents

Advertisement

Quick Links

USB Bluetooth Adapter
CN-512 Bluetooth 2.0+EDR klass 2
CN-516 Bluetooth 2.0+EDR klass 2
CN-520 Bluetooth 2.0+EDR klass 2
CN-521 Bluetooth 2.0+EDR klass 1
Copyright © 2005 Toshiba Corporation
All rights reserved
Full Manual

Advertisement

Table of Contents
loading

Related Manuals for Sitecom CN-516

Summary of Contents for Sitecom CN-516

  • Page 1 USB Bluetooth Adapter CN-512 Bluetooth 2.0+EDR klass 2 CN-516 Bluetooth 2.0+EDR klass 2 CN-520 Bluetooth 2.0+EDR klass 2 CN-521 Bluetooth 2.0+EDR klass 1 Full Manual Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 2 Cautions This device‟s design and manufacturer has your safety in mind. In order to safely and effectively use this device, please read the following before usage. Usage Cautions The user should not modify this device. The environmental temperature should be within +5 ~ +35 degrees Celsius.

  • Page 3: Table Of Contents

    Contents 1. Installation of the Bluetooth Software ............4 2. Configuring Bluetooth services ..............8 3. Device properties and Security settings ............9 4. Remote Camera ..................11 5. Wireless File Transfer ................17 6. Bluetooth Information Exchanger ............21 6.1 Object Push Profile (OPP) ..............

  • Page 4: Installation Of The Bluetooth Software

    1. Installation of the Bluetooth Software Place the installation CD-ROM into the PC. Setup should start automatically. If setup does not start go to Windows File Explorer, locate the CD-ROM and run „setup.exe‟ Choose „Install (v3.03.13(C))‟. The InstallShield Wizard will start. On the Welcome screen click Next to continue.
  • Page 5 Read the License Agreement and select ‘I accept the terms in the license agreement’. Click Next. On the next screen click Install to continue. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 6 Installation is in progress...wait a few seconds. You will get a dialogue box indicating that the Installation process may take up to 15 minutes. Click Yes to proceed. You will get a prompt to insert the USB-BT device. Do so and click OK. If your PC has an integrated BT module, this dialogue box will not appear.
  • Page 7 To complete Installation click Finish. In order to use the Bluetooth Software you have to reboot the PC. Click Yes to proceed. Copyright © 2005 Toshiba Corporation All rights reserved...

  • Page 8: Configuring Bluetooth Services

    2. Configuring Bluetooth services Right click the ICON in the tray bar and select Service Properties... from the menu to open the „Service Properties‟ window Now you are able to toggle the following Bluetooth™-services Bluetooth Information Exchange Service: ... enables a (server) function that allows files, images and business cards to be transferred from a remote device using Bluetooth Information Exchanger.

  • Page 9: Device Properties And Security Settings

    3. Device Properties and Security settings Open the „Device Properties and Security‟ window Right click the ICON in the tray bar and select Device Properties and Security... from the menu. You will get a general overview of your Bluetooth™ Hardware properties You can get useful information, such as Device Name, Device Address or the Manufacturer Name of your Bluetooth chipset.
  • Page 10 The Security Tab allows you to configure your Bluetooth™ device security Discoverability mode: Set whether your device is visible to other Bluetooth™ devices or not. Other devices will be still able to establish a connection to your device as long as your Connectability mode is set to „Connectable mode‟ Connectability mode: Set whether you allow remote Bluetooth™...

  • Page 11: Remote Camera

    4. Remote Camera Launch the „Remote Camera‟ application Right click the ICON in the tray bar and select Remote Camera. Activate Bluetooth on the Remote Camera and click the „Camera Search...‟ button. Device Discovery will be performed...this may take a few seconds. Copyright ©...
  • Page 12 All available Bluetooth™ cameras will be listed. Right click the camera and select „Connect‟ or just double click the camera ICON A green/yellow connected chain will be displayed if the Bluetooth™ connection is established. A second window appears which shows an almost live preview of the camera picture.
  • Page 13 Basically you will take one picture by clicking on the right trigger button. [Camera ICON] It is also possible to take consecutive pictures by clicking the left trigger button. [Camera ICON] The pictures will be automatically transferred to the PC. A progress bar indicates the status of the image transfer Copyright ©...
  • Page 14 You will see a small preview of the transferred pictures in Remote Camera” application. Just double click a picture to open it in your default picture viewer. You can easily disconnect the Camera by right clicking on the camera ICON and selecting Disconnect from the context menu. A dialogue box appears and asks whether the Bluetooth™...
  • Page 15 It is possible to change some default settings in the Remote Camera application. Choose [Bluetooth]->[Properties]->[...] from the menu. Device detection filter The Remote Camera application may discover devices other than digital cameras, depending on which profiles are supported. Adjusting the setting to “Loose filtering” will increase the chance that devices other than cameras will be detected.
  • Page 16 Settings for size of captured image Images will be sent to your PC after having been automatically converted to the size specified in the dialog box above, regardless of the size of the original image data. Inbox settings Opens Browse folders...” dialog box and allows you to select the folder where you would like your captured images to be saved.

  • Page 17: Wireless File Transfer

    5. Wireless File Transfer Launch the „Wireless File Transfer‟ application Right click the ICON in the tray bar and select Wireless File Transfer. There is a second way to launch the Wireless File Transfer application. A right click a file allows you to select „to Bluetooth‟ -> „Search other devices‟...
  • Page 18 The Wireless File Transfer application starts and Device Discovery is performed. Note: If the desired device does not appear in the list, please check that the device is switched on. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 19 After device discovery, select the Bluetooth™ devices to which you want to send the file. You can also add more than one File or Folder to the list. Finally click „Send‟ and the Files/Folders will be transferred to the selected Bluetooth™...
  • Page 20 A progress bar indicates transfer status After the File/Folder is transferred a dialogue box appears and confirms successful transfer. Copyright © 2005 Toshiba Corporation All rights reserved...

  • Page 21: Bluetooth Information Exchanger

    6. Bluetooth Information Exchanger Launch the „Bluetooth Information Exchanger‟ application Double click the ICON on the Desktop or open Explorer. This feature is fully integrated into Explorer FTP: File Transfer This is mainly used to handle files and folders in the same way as it exist locally.
  • Page 22 To change any default settings of the Bluetooth Information Exchanger choose [Bluetooth]->[Configuration]. You can also right click the Bluetooth™ ICON on the Desktop and select „Properties‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 23 “General” shows the Device Name and the Device Type (Class of Device). To clear the list of the most recently used Bluetooth™ devices click the „Clear‟ button. The device list in the example below appears after right clicking on any file or folder. Example: You have two devices in the list...
  • Page 24 “Mode” gives information on the Bluetooth™ Security settings. Nothing can be changed in this view. You can change the security settings by right clicking on the Bluetooth™ ICON in the tray bar and selecting „Device Properties and Security...‟ from the context menu. Copyright ©...
  • Page 25 “Inbox/Business Card” offers a choice: Inbox Directory: Sets the location on the hard drive of Inbox” folder (where incoming business cards are saved). Click the [Browse] button to open Browse folders” window. Specify the directory where you would like Inbox” to reside, and click the [OK] button. My Business Card: Sets the location where you save your personal business card containing your personal details.
  • Page 26 In “Shared Folder” you can set the location on the hard drive of a shared folder used when exchanging files with “File transfer”. Click the [Browse] button to open Browse folders” window. Specify the directory where you want Shared Folder” to reside, and then click the [OK] button.
  • Page 27 “Image Inbox” offers a choice: Image Inbox Directory: Sets the location of Image Box” folder (where image data that has been received will be saved) on the hard drive. Click the [Browse] button to open Browse folders” window. Specify the directory where you wish Image Box”...
  • Page 28 In “Service Class” you can apply the OBEX filter. Enable: Determine service class (Check for OBEX supports). Disable: Do not determine service class (show all devices). Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 29 “My Information” shows information about your device (read only!). The LMP Version indicates which Bluetooth™ version your Hardware supports. Bluetooth™ v1.1 -> LMP Version 01 Bluetooth™ v1.2 -> LMP Version 02 Bluetooth™ v2.0 + EDR -> LMP Version 03 Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 30 “Version” shows version information about Bluetooth Information Exchanger. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 31 ® “Associate” assigns the default application (Microsoft Outlook, etc) that starts on reception of a business card (*.vcf). Enabled: Start associated application. Disabled: Do not start associated application. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 32 “Transfer Mode” sets which service to use for sending files when you right click in Explorer and select “To Bluetooth”. Object Push: Sending files usind OPP (Object Push Profile). File transfer: Sending files using FTP (File Transfer Protocol). The destination device may only support one of these profiles. Sending a file using a profile not supported by the destination device will result in error.
  • Page 33 Service Security allows you to set some OBEX related security settings. Object Push: When another device generates a request to send or receive a business card, a message is displayed asking whether you will allow the card to be sent or received. File Transfer: When another device generates a request to send or receive a file, a message is displayed asking whether you will allow an FTP connection.

  • Page 34: Object Push Profile (Opp)

    6.1 Object Push Profile (OPP) Double click the ICON on the Desktop or open Explorer. This feature is also fully integrated into Explorer. Double click the “Object Push” ICON to perform any OPP operation. If the remote device is not in the device list you have to perform device discovery again.

  • Page 35: File Transfer Profile (Ftp)

    Service Discovery: A Service Discovery will be performed to check whether OPP is supported by the Remote device. Send Business Card To: The personal business card will be sent to a destination device (i.e. "BT_Remote_PC"). Receive Partner‟s Business Card From: The business card will be pulled from a destination device (i.e.
  • Page 36 If an OBEX password is set on the remote device please enter the correct password. You will get a list of all files and folders of the remote device. Drag‟n Drop operations with files and folder to/from this window are supported.
  • Page 37 Right clicking on a file in the remote directory displays a context menu with the following entries: Receive File: Copy the file from the remote device the local device. Delete: Deletes the file on the remote device. Right clicking on a folder in the remote directory displays a context menu with the following entries: Open: Displays the subfolder directory.

  • Page 38: Basic Imaging Profile (Bip)

    6.3 Basic Imaging Profile (BIP) Double click the ICON on the Desktop or open Explorer. This feature is also fully integrated into Explorer. Double click the “Image Transfer” ICON to perform any BIP operation to a remote device If the remote device is not in the device list you have to do a device discovery again.
  • Page 39 Drag‟n Drop a picture to the remote device to transfer it Copyright © 2005 Toshiba Corporation All rights reserved...

  • Page 40: Bluetooth Settings

    7. Bluetooth Settings Launch the „Bluetooth Settings‟ application. Right click the Bluetooth™ ICON in the tray bar and select `Bluetooth Settings´from the menu or launch it via the START menu. [START]->[All Programs]->[Bluetooth]->[Bluetooth Settings] Bluetooth Settings application will be opened. In the above view no connections are configured. Copyright ©...
  • Page 41 „Bluetooth‟ menu of Bluetooth Settings Add New Connection...: Launches New Connection Wizard”. Connect: Establishes a Bluetooth™ connection to the selected device. Disconnect: Disconnects an existing Bluetooth™ connection of the selected device. Detail...: Shows detailed information of the selected connection. Delete: Deletes the selected connection ICON.
  • Page 42 AV player selection...: Music applications and video playback applications installed on your PC (e.g.,"Windows Media Player 9" and "InterVideo WinDVD") may be operated by the remote control buttons on your stereo headphones. The remote control command sent by the stereo headphones must be compliant with the Bluetooth AVRCP-profile.
  • Page 43 „View‟ menu of Bluetooth Settings You can configure the view type in a way similar to Windows™ Explorer. „Help‟ menu of Bluetooth Settings Help: Online manual will be launched. About: Shows the version of the installed Bluetooth™ software. Copyright © 2005 Toshiba Corporation All rights reserved...

  • Page 44: Configure A Connection To A Bt Mouse And/Or Keyboard

    7.1 Configure a connection to a BT Mouse and/or Keyboard Launch the „Add New Connection Wizard‟ application. Right click the ICON in the tray bar and select Add New Connection. It is also possible to launch Bluetooth Settings and then click the „New Connection button‟.
  • Page 45 Now a device discovery will be done...this may take a few seconds A list of all available Bluetooth™ devices will be displayed. Choose the appropriate one and click „Next‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 46 Now the availability of the HID-profile will be checked, and if security is on, the pairing will be done. You have to know the Passkey of the mouse. For most mice one of the following passkeys will fit: “0000”, “0”, “1234” or just press [ENTER]. You have to enter the proper passkey, and then click „OK‟...
  • Page 47 Now the Bluetooth™ Connection to the mouse will be configured and the necessary drivers will be installed. Here the “Connection Name” can be edited and a different one can be assigned. If you are satisfied with the the assigned name and ICON click „Next‟...
  • Page 48 Finally you will be informed that the connection registration is completed. Click „Finish‟ to close the connection wizard. Now you can see a configured and connected Bluetooth™ device in “Bluetooth Settings”. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 49 A context menu will appear if you right click the connection ICON. Connect: Establishes a Bluetooth™ connection to the selected device. Disconnect: Disconnects an existing Bluetooth™ connection to the slected device. Delete: Deletes the selected connection ICON. Detail: Shows detailed information of the selected connection. Copyright ©...

  • Page 50: Configure A Connection To A Bluetooth™ Enabled Printer

    Create Shortcut on Desktop: Creates a shortcut of the selected connection ICON on the desktop. Rename: Renames the selected connection ICON. Change ICONs: Assigns a different ICON to the selected connection. 7.2 Configure a connection to a Bluetooth™ enabled printer Launch the „Add New Connection Wizard‟...
  • Page 51 Choose “Express Mode (Recommended)” and click „Next‟. In “Express mode” the connection wizard will automatically choose the correct profile. By using “Custom Mode” it is possible to choose the profile manually. Now a device discovery will be done...this may take a few seconds Copyright ©...
  • Page 52 A list of all available Bluetooth™ devices will be displayed. Choose the appropriate one and click „Next‟ Now the availability of the HCRP-profile will be checked, and if security is on, the pairing will be done. You have to know the Passkey of the printer.
  • Page 53 A dialogue box appears and informs you that the printer port will be automatically assigned during printer configuration. Click „OK‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 54 The Add Printer Wizard will automatically launch if the printer driver is not included in the drivers of your Operating System. Click „Next‟ to configure your printer. Deselect “Automatically detect and install my Plug and Play printer” and click „Next‟. Copyright ©...
  • Page 55 Now you can choose a printer port. Which you select does not matter, because the Bluetooth™ connection wizard automatically assigns the correct port during the connection configuration. Click „Next‟ on this window to proceed. Choose the correct driver for your printer. You may have to specify the location where the printer driver is located.
  • Page 56 You can assign a Printer name and select whether this printer should be the default printer. Click „Next‟ to continue. Select „No‟ to “Do you want to print a test page?” and click „Next‟. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 57 A summary window appears. Click „Finish‟ to complete printer driver installation. The printer-drivers will be installed. This may take a few seconds. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 58 After finishing installation of printer drivers you will get a summary view in the Bluetooth connection wizard. Click „Next‟ to proceed. Here the “Connection Name” can be edited and a different one can be assigned. If you are satisfied with the the assigned name and ICON click „Next‟...
  • Page 59 Finally you will be informed that connection registration is completed. Additional available profiles will be listed, i.e. Serial Port Click „Finish‟ to close the connection wizard. A context menu will appear if you right click the connection ICON. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 60 Connect: Establishes a Bluetooth™ connection to the selected device. Disconnect: Disconnects an existing Bluetooth™ connection to the selected device. Delete: Deletes the selected connection ICON. Detail: Shows detailed information of the selected connection. Create Shortcut on Desktop: Creates a shortcut of the selected connection ICON on the desktop. Rename: Renames the selected connection ICON.

  • Page 61: Configure A Dial-Up Connection

    7.3 Configure a Dial-up connection Launch the „Add New Connection Wizard‟ application. Right click the ICON in the tray bar and select Add New Connection. It is also possible to launch Bluetooth Settings and then click the „New Connection button‟. Please make sure that your Bluetooth™...
  • Page 62 Now a device discovery will be done...this may take a few seconds A list of all available Bluetooth™ devices will be displayed. Choose the appropriate one and click „Next‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 63 Now the availability of the DUN-profile will be checked, and if security is on, the pairing will be done. Baiscally you have to enter the passkey on the PC side, and then you have to confirm this passkey on the mobile phone. Additionally, on some mobile phones you have to confirm the connection request of the PC.
  • Page 64 Now you are able to configure some special AT commands for the dial-up connection. This AT commands are necessary for HSCSD and GPRS connections. Basically the GPRS APN can also be preconfigured on the mobile phone. If you are already able to establish a GPRS connection from the mobile phone it isn‟t necessary to enter the APN again as AT command.
  • Page 65 Enter your dial-up details and click „Finish‟ to complete the configuration. If this dial-up should used as the default select “Set as Default Dial-up” A context menu will appear if you right click the connection ICON. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 66 Connect: Establishes a Bluetooth™ connection to the selected device. Disconnect: Disconnects an existing Bluetooth™ connection to the selected device. Delete: Deletes the selected connection ICON. Detail: Shows detailed information of the selected connection. Create Shortcut on Desktop: Creates a shortcut of the selected connection ICON on the desktop. Rename: Renames the selected connection ICON.

  • Page 67: Configure A Stereo Headset Connection

    7.4 Configure a Stereo Headset connection Launch the „Add New Connection Wizard‟ application. Right click the ICON in the tray bar and select Add New Connection. It is also possible to launch Bluetooth Settings and then click the „New Connection button‟. Please make sure that your Bluetooth™...
  • Page 68 Now a device discovery will be done...this may take a few seconds A list of all available Bluetooth™ devices will be displayed. Choose the appropriate one and click „Next‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 69 Now the availability of the A2DP-profile will be checked, and if security is on, the pairing will be done. You have to know the Passkey of the Headset. For most headsets one of the following passkeys will fit: “0000”, “0”, “1234” or just press [ENTER]. You have to enter the proper passkey, and then click „OK‟...
  • Page 70 Drivers for the Bluetooth™ Headset will be installed. Here the “Connection Name” can be edited and a different one can be chosen. If you are satisfied with the the assignment of name and ICON click „Next‟ to continue. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 71 Finally you will be informed that the connection registration is completed. Additional available profiles will be listed, i.e. Headset, Serial Port Click „Finish‟ to close the connection wizard. A context menu will appear if you right click the connection ICON. Copyright ©...
  • Page 72 Connect: Establishes a Bluetooth™ connection to the selected device. Disconnect: Disconnects an existing Bluetooth™ connection to the selected device. Delete: Deletes the selected connection ICON. Detail: Shows detailed information of the selected connection. Create Shortcut on Desktop: Creates a shortcut of the selected connection ICON on the desktop. Rename: Renames the selected connection ICON.

  • Page 73: Configure A Headset Connection

    7.5 Configure a Headset connection Launch the „Add New Connection Wizard‟ application. Right click the ICON in the tray bar and select Add New Connection. It is also possible to launch Bluetooth Settings and then click the „New Connection button‟. Please make sure that your Bluetooth™...
  • Page 74 Now a device discovery will be done...this may take a few seconds A list of all available Bluetooth™ devices will be displayed. Choose the appropriate one and click „Next‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 75 Now the availability of the Headset-profile will be checked, and if security is on, the pairing will be done. You have to know the Passkey of the Headset. For most headsets one of the following passkeys will fit: “0000”, “0”, “1234” or just press [ENTER]. You have to enter the proper passkey, and then click „OK‟...
  • Page 76 You have to push the “Connect” button on the headset to confirm the connection. To determine teh “Connect” button please check the manual. A “test-connection” will be established and disconnected to confirm whether all is working well. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 77 Here the “Connection Name” can be edited and a different one can be chosen. If you are satisfied with the the assignment of name and ICON click „Next‟ to continue. Finally you will be informed that the connection registration is completed. Click „Finish‟...
  • Page 78 A context menu will appear if you right click the connection ICON. Connect: Establishes a Bluetooth™ connection to the selected device. Disconnect: Disconnects an existing Bluetooth™ connection to the selected device. Delete: Deletes the selected connection ICON. Detail: Shows detailed information of the selected connection. Copyright ©...

  • Page 79: Configure A Fax Connection

    Create Shortcut on Desktop: Creates a shortcut of the selected connection ICON on the desktop. Rename: Renames the selected connection ICON. Change ICONs: Assigns a different ICON to the selected connection. 7.6 Configure a FAX connection Launch the „Add New Connection Wizard‟ application. Right click the ICON in the tray bar and select Add New Connection.
  • Page 80 Now a device discovery will be done...this may take a few seconds A list of all available Bluetooth™ devices will be displayed. Choose the appropriate one and click „Next‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 81 Now a service search will be performed and checked whether security is required by one of the Bluetooth™ devices. In that case pairing will be done. You have to know the Passkey of the remote device. You have to enter the proper passkey, and then click „OK‟ Copyright ©...
  • Page 82 All available Service will be listed. Choose “Fax” profile and click „Next‟. Configure the assigned COM Port and whether this port should be automatically connected if used. Normally, use the default settings and just click „Next.‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 83 Bluetooth™ COM Port configuration will be done. If this is the first tiem the modem has been used, “Local Information” has to be configured. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 84 The modem installation wizard will be launched. Select “Don‟t detect my modem; I will select it from a list” and click „Next‟. Choose “Standard 14400 bps Modem” and click „Next‟. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 85 Choose the COMport you were informed of before. Finally click „Finish‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 86 The configured modem will be added to the Modem list. The Bluetooth™ configuration wizard will proceed. Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 87 Here the “Connection Name” can be edited and a different one can be chosen. If you are satisfied with the the assignment of name and ICON click „Next‟ to continue. Finally you will be informed that the connection registration is completed. Click „Finish‟...
  • Page 88 A context menu will appear if you right click the connection ICON. Connect: Establishes a Bluetooth™ connection to the selected device. Disconnect: Disconnects an existing Bluetooth™ connection to the selected device. Delete: Deletes the selected connection ICON. Detail: Shows detailed information of the selected connection. Copyright ©...
  • Page 89 Create Shortcut on Desktop: Creates a shortcut of the selected connection ICON on the desktop. Rename: Renames the selected connection ICON. Change ICONs: Assigns a different ICON to the selected connection. You have to enable fax cababilities in Windows. Open the Printers and Faxes view: [START]-[Printers and Faxes] Then click “Set up faxing”...
  • Page 90 All required files will be installed. Configure your Fax service. Right click the fax ICON and select „Properties‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 91 Click Devices and select the newly installed modem. Then click „Properties...‟ Configure Send” properties Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 92 Configure Receive” properties If you have selected to automatically receive faxes, a Bluetooth™ connection ICON will appear in the tray bar. Now you can use your fax device in the same way as a usual printer. Limitation: ® If automatic FAX receiving is enabled on Microsoft FAX manager and DUN, FAX, or LAP profile ICON is registered on "Bluetooth Settings", then it may take a couple of minutes to turn on Bluetooth on resume from standy.

  • Page 93: Configure A Network Connection

    7.7 Configure a Network connection Launch the „Add New Connection Wizard‟ application. Right click the ICON in the tray bar and select Add New Connection. It is also possible to launch Bluetooth Settings and then click the „New Connection button‟. Please make sure that your Bluetooth™...
  • Page 94 Now a device discovery will be done...this may take a few seconds A list of all available Bluetooth™ devices will be displayed. Choose the appropriate one and click „Next‟ Copyright © 2005 Toshiba Corporation All rights reserved...
  • Page 95 The Connection wizard decides based on the CoD (Class of Device) which profile to connect to. If CoD indicates an Access Point the following profiles will be looked for: PAN->LAP->DUN Now the availability of the PAN->LAP->DUN will be checked, and if security is on, the pairing will be done.
  • Page 96 Here Connection Name” can be edited and a different one can be chosen. If you are satisfied with the the assignment of name and ICON click „Next‟ to continue. Finally you will be informed that the connection registration is completed. Additional available profiles will be listed, i.e.
  • Page 97 A context menu will appear if you right click the connection ICON. Connect: Establishes a Bluetooth™ connection to the selected device. Disconnect: Disconnects an existing Bluetooth™ connection to the selected device. Delete: Deletes the selected connection ICON. Detail: Shows detailed information of the selected connection. Copyright ©...
  • Page 98 Create Shortcut on Desktop: Creates a shortcut of the selected connection ICON on the desktop. Rename: Renames the selected connection ICON. Change ICONs: Assigns a different ICON to the selected connection. If you connect to an Access Point which is connected to the Internet and you have a connection to another LAN with the integrated network card at the same time, you have to change the metric setting to browse in the internet.

  • Page 99: Faq

    8. FAQ A remote device is not listed in the device list Make sure your remote device is discoverable. Check the manual for instructions. How do I select the profile to connect to? Select “Custom Mode” in the Bluetooth Connection Wizard. You will get a list of all availabe profiles of the remote device.
  • Page 100 Enables image-only files to be transferred to a wireless device. Bluetooth Profile A specification that guarantees the connection to the service function of a remote Bluetooth device. For a Bluetooth device to send and receive information to and from another device, both devices must support shared profiles designated for each function, such as dial-up networking, faxing, printing and human interface devices.
  • Page 101 Abbreviation of LAN Access Profile. A Bluetooth profile that enables you to establish a Bluetooth connection to a LAN access point to access a LAN via PPP. Abbreviation of Object Push Profile. A Bluetooth profile that enables you to exchange business cards with a wireless device.
  • Page 102 Names, (e)mail addresses, telephone numbers and other information are exchanged in the form of electronic business cards (in *.vcf format), allowing all parties to easily register each other's data in their address books. ® The standard is extensively compatible with Microsoft ®...

This manual is also suitable for:

Cn-512Cn-520Cn-521

Table of Contents