Download  Print this page

Whirlpool MK6124XAQ Installation Instructions

Trim-kit for use with whirlpool microwave oven models: mt5120xaq. mt6120x-yq mt6120xyb. mt6900xw, mt6901x-w, kcms122ywh, kcms125ywh.
Hide thumbs
   

Advertisement

INSTALLdTlON
INSTRUCTION
FOR WHIRLPOOL
TRIM-KIT
MODELS:
MK6124XAQ
MK6124XAB
(KEEP FOR FUTURE REFERENCE)
FOR USE WITH WHIRLPOOL MICROWAVE OVEN MODELS: MT5120XAQ. MT6120X-YQ MT6120XYB. MT6900XW, MT6901X-W. KCMS122YWH, KCMS125YWH
[ UL USTED
- FOR USE OVER GAS & ELECTRIC HEAT SOURCE INCLUDING MODELS: SB130PER. SBiGOPD(. RBlGOPXY. KEBl141Y, RBlZOPXY, RBlOOPXY. RBlOO5a
)
STEP 1
PART LIST
2
STEP
CUT-OUT DIMENSIONS
Microwave Oven
Cutout Openin
Aluminum
Vent
Low
Profile
ScreWS
3
STEP
1. Disconnect
microwave
and remove any loose
items inside the oven before proceeding
with
d
installation.
2. Detach Exiting
Strews(4)
from the microwave
cabinet sides at locations as indicated.
3. Install Ducts D4 and DlO by m-attaching
Existing
Strew.(4)
and using No.10 Strews(2)
as shown.
4. Position Duct D6 over microwave,
covering
rear exhaust vent.
Loosely
attach Duct
using No.12 Strews(2)
as shown.
5. Lii the front of Duct D6 and peel backing off
double sided tape from the Duct bottom.
Press
down firmly on Duct. Tighten No.12 Screws(S)
at the back.
PART NO. 4313741
REAR VIEW
OF MICROWAVE
,./za
Duct D6
Height = 15 '/,'
Length = 22 '&'
Depth
= 23 "I,'
(min.)
\Built-in
'Oven
Cutout
openklg
STEP
4
1. Mark center positions (or center-punch)
for
the Anti-Tip Bracket as shown.
Dimenslons:
A = 1 =/,'
0 = 3 'I,'
c = 17 'I.'
2. Drill pilot holes as required.
3. Install Anti-Tip Bracket
with Low Profile
Low
Profile
Screws
7
$$J
Anti-Tip
Bracket *
Screw(P)
as shown.
Page 1

Advertisement

   Related Manuals for Whirlpool MK6124XAQ

   Summary of Contents for Whirlpool MK6124XAQ

  • Page 1 MK6124XAB (KEEP FOR FUTURE REFERENCE) FOR USE WITH WHIRLPOOL MICROWAVE OVEN MODELS: MT5120XAQ. MT6120X-YQ MT6120XYB. MT6900XW, MT6901X-W. KCMS122YWH, KCMS125YWH - FOR USE OVER GAS & ELECTRIC HEAT SOURCE INCLUDING MODELS: SB130PER. SBiGOPD(. RBlGOPXY. KEBl141Y, RBlZOPXY, RBlOOPXY. RBlOO5a [ UL USTED...
  • Page 2 STEP 5 STEP 6 Antl-Tip Assembly Mark center positions (or center punch) for Place microwave oven in the opening the pilot holes(4) as shown. Dim.A is of the cut-out. Be careful nof to Profile measured from the cut-out bottom and Flange Clip PoSitIon...

This manual is also suitable for:

Mk6124xab

Comments to this Manuals

Symbols: 0
Latest comments: