Demo Mode; Set Start Location For Demo; Enabling The Display Of Tmc Messages; Disabling The Display Of Tmc Messages - Vauxhall Antara Infotainment Manual

system, see "User defined points of
interest" below.
Select the menu item to remove all
user defined POI data from the
Infotainment system.
■ Demo Mode: the demo mode
enables you to plan your trip, and
provides an overview of the route.
The demo mode requires a start
position, that may be different from
your current position, and a
destination.
To set a start position: see Set Start
Location For Demo below.
To set a destination: use one of the
usual options for destination input
3 46.
To activate the demo mode: set the
menu option to On. Route guidance
is now simulated.
Please note, that in demo mode the
displayed estimated arrival time or
remaining travel time, see
"Information on the map display"
above, is not realistic. In demo
mode the simulated vehicle speed
is unrealistically high, to
accomplish a short execution time
for a simulated trip.
To return to normal route guidance:
set the menu option to Off.

■ Set Start Location For Demo:

displays a menu for the manual
input of a start position.
Enter the address of the desired
start position 3 46.
Enabling or disabling the display of
TMC (traffic) messages
You can enable the display of TMC
messages even if no route guidance
is active.
Notice
Detailed descriptions on TMC, see
chapter "Dynamic guidance" 3 68.
Press the SETUP button, and then
select the Traffic Messages menu
item.
Navigation
Enabling the display of TMC
messages
Set Dynamic navigation to Prompt. In
the event of a traffic jam or other traffic
incidents a corresponding TMC
message will be shown on the
display.
Disabling the display of TMC
messages
Set Dynamic navigation to Off or
Automatic. No TMC messages will be
shown on the display.
43