Automatic Light Control; High Beam; Headlight Flash - Vauxhall Insignia Owner's Manual

110 Lighting

Automatic light control

Automatic light control function
When the automatic light control
function is switched on with the
engine running, the system switches
between daytime running lights and
automatic headlights, depending on
lighting conditions
Daytime running lights
Daytime running lights increase
visibility of the vehicle during daylight.
Tail lights are not on.
Automatic headlight activation
During poor light conditions the
headlights are switched on.
Tunnel detection
When a tunnel is entered the
headlights are switched on without
delay.
Adaptive forward lighting 3 112.

High beam

To switch from low to high beam,
push lever.
To switch to low beam, push lever
again or pull.

Headlight flash

To activate the headlight flash, pull
lever.