Vauxhall Insignia Owner's Manual page 165

164 Vehicle care
2. Rotate bulb holder anti-clockwise
to disengage. Withdraw the bulb
holder from the reflector housing.
3. Detach bulb from bulb holder and
renew the bulb.
4. Insert the bulb holder, engaging
the two lugs in the reflector
housing and rotate clockwise to
secure.
5. Rotate bulb holder clockwise as
far as it will go.
6. Fit cap and rotate clockwise.
High beam
1. Rotate cap 2 anti-clockwise and
remove.
2. Detach wiring connector from
bulb.
3. Disengage spring clip from
retainer by pressing forward and
then swing downwards.
4. Withdraw bulb from reflector
housing.
5. When installing the new bulb,
insert lugs in the reflector housing
recesses and engage the spring
clip.
6. Reattach the wiring connector
onto bulb.
7. Fit cap and rotate clockwise.