Changing The Remote Control Battery; Synchronizing Remote Control - Vauxhall Corsa Owner's Manual

Changing the remote control battery

Exchange the battery as soon as the range
of the remote control starts to become
reduced.
Detach remote control from key section
with a screwdriver, as shown in the figure.
The transponder for the immobiliser is in
the front of the key. Make sure that it is not
damaged or detached.
Position screwdriver and open remote
control by making a gentle rotary
movement – see figure above.
Open up the remote control. Remove
battery using screwdriver. Replace battery-
see page 237 for battery type, noting
installation position. Close remote control
and audibly engage. Slide remote control
into key fob and engage.
The battery change must be performed
within 3 minutes, otherwise the remote
control will have to be resynchronized –
see next column.
Make sure that you dispose of old batteries
in accordance with environmental
protection regulations.

Synchronizing remote control

In the event of malfunctions, synchronize
remote control:
1. Switch on ignition; system will then
remain in synchronizing mode for
30 seconds.
2. Briefly press button p or q on remote
control unit in ignition.
3. The central locking system locks and
unlocks to show that the remote control
has been synchronized.
47