Setting date and time
In the Infotainment system 3, time and
date are set automatically upon receipt of
1)
a GPS satellite signal
. If the time
displayed does not correspond to the local
time, it can be set manually in 30-minute
steps or be corrected automatically 3
2)
via an RDS time signal
.
For the radio, time and date can be set
manually or corrected automatically via an
RDS time signal 3.
Some RDS transmitters do not send correct
time signals. If the incorrect time is
displayed often, deactivate the automatic
time synchronisation 3 and set the time
manually.
The automatic setting is indicated by Ö in
the display.
1)
GPS = G
P
S
lobal
ositioning
ystem,
Satellite system for world-wide positioning.
2)
RDS = R
D
S
adio
ata
ystem.
40
Vehicles with Triple Information Display
or Multi-Information Display for radio
telephone 3
Manual setting
Switch off radio. Press Ö and ; above the
display as follows:
Press Ö for approx. 2 seconds:
Day flashes
;: Set day
Ö: Month flashes
;: Set month
Ö: Year flashes
;: Set year
Ö: Hours flash
;: Set hours
Ö: Minutes flash
;: Set minutes
Ö: Clock is started.
Deactivating and activating automatic
setting 3
Hold down Ö for approx. 2 sec., clock
display is now in setting mode.
Press Ö twice (until year flashes).
Press Ö and hold down for approx.
3 seconds until } flashes in display and
text "RDS TIME" appears (years flash
during this time).
Press ;, Display indicates:
RDS TIME 0 = Deactivated
RDS TIME 1 = Activated
Press Ö three times.