Load Compartment Cover - Vauxhall Corsa Owner's Manual

60 Storage
If the backrest is split, unlock the
relevant side, and unlock at both
sides if it is a single unit.
Folding down rear backrests
Remove load compartment cover as
necessary.
Push head restraints down by
pressing the catch.
Guide the seat belts through belt
mounts to protect them against
damage. When folding the backrests,
pull the seat belts along with them.
Disengage the backrest (single or
split) using the release lever and fold
it down onto the seat cushion.
If the backrest is split, unlock the
relevant side, and unlock at both
sides if it is a single unit.
If the vehicle is to be loaded via a rear
door, take the seat belt out of the belt
mount on the backrest, roll it up and
insert the latch plate into the side
shade retainer.
Move rear seat backrests upright and
allow locking mechanisms to engage
audibly at both sides. Once the
backrests are locked the red mark
must no longer protrude.
The rear seat backrests can be
locked in two positions, vertical and
raked.
Do not trap the seat belt when moving
the backrest to the upright position.
Install the load compartment cover.

Load compartment cover

Do not place any objects on the cover.