Displaying The Settings Screen; Selecting From The Setup Screen - Universal Remote Control COMPLETE CONTROL MXW-920 Owner's Manual

Displaying the Setup Screen
You can adjust the settings of the MXW-920
controller whenever you like. Simply press and
hold both the Main and the Enter buttons at the
same time for three seconds. The screen displays
the Setup and the Edit screens. Press the Page +
and - buttons to toggle between both screens.
If you do not press any button on the Setup screen
within 30 seconds, the MXW-920 times out and
automatically returns to normal operation. You can
return to normal operation before that by pressing
the Main button.
At the same time, press and
hold both the Main and the
Enter buttons. When the Setup
screen appears, release the two
buttons.

Selecting from the Setup Screen

Simply touch the button for the setting you'd like to adjust:
MXW-920 O
WNER
LCD - Adjustments for the LCD screen
Light - Adjustments for backlight of the
Sound - The volume of the beeps.
System - Set the threshold for the low
Version - Displays factory info.
Page 3
' M
S ANUAL
(brightness, contrast, light)
buttons.
battery warning