Table of Contents
Advertisement
Deleting RAID Sets
1.
To remove one or more RAID sets, select "Delete RAID Set."
2.
Select desired set and press Y when asked "Are You Sure?"
Resolving Conflict
When a RAID set is created, the metadata written to the disk includes drive connection information
(Primary Chanel, Secondary Channel). If, after a disk failure, the replacement disk was previously part
of a RAID set (or used in another system), it may have conflicting metadata, specifically in reference to
the drive connection information. If so, this will prohibit the RAID set from being either created or rebuilt,
In order for the RAID set to function properly, this old metadata must be first overwritten with the new
metadata. To resolve this, select "Resolve Conflict" and the correct metadata, including the correct drive
connection information, will be written to the replacement disk.
3-2
SATARaid Manual - Rev. 0.92
P R E L I M I N A R Y
Advertisement
Table of Contents
Need help?
Do you have a question about the SataRaid and is the answer not in the manual?
Questions and answers