Canon PIXMA MX432 Network Setup Manual page 8

Installing the Drivers & Software
The printer automatically searches for access points that support WPS (Wi-Fi Protected Setup)*.
*Unless you are absolutely sure your access point supports WPS and you are familiar with activating this on your access point, press the
Stop button on the printer's operation panel and click on Other Methods on the Setup Procedure Selection screen (screenshot shown
below)*.
If the Push Button Method is not shown on the printer's operation panel(when no WPS access points have been detected), select Standard
setup on the printers operation panel, then click Other Methods on the Setup Procedure Selection screen
If you selected the Push Button Method, follow any remaining
instructions to complete setup.
If you selected Other Methods, please continue to the next page for
important information
<< Previous
Skip ahead to instructions
Next >>
8