Using The Supplied Dd30 Docking Station For Ipod; Ipod Compatibility - Cambridge Audio Sonata AR30 User Manual

Operating instructions (continued)

Using the supplied DD30 docking station for iPod

Note: Make sure that there's no device attached to the MP3 input on the front of the
unit for the DD30 docking station to work.
The Sonata AR30/DR30 comes with a supplied DD30 docking station for iPod.
Connect the DD30 to the connector located on the back of the unit and insert an
appropriate iPod dock adaptor for your iPod. DD30 docking station is compatible with
Apple's standard dock adaptors, supplied with all new iPod.
Power Tuner
AM Loop 300Ω FM 75Ω
On Off
Right Left
Power AC
CD
Loudspeaker Terminals
DD30 Dock
1. Switch the unit on, and select the MP3 input source by pressing the Source button
or the source buttons on the remote.
22
L L
In
Trigger Out
DVD AUX
R R
Out CD DVD Aux
12V @ 30mA Tip +ve
Sub Rec Out Audio In
2. Press the Play/Pause button to start playback.
3. Press the Menu button to step back one menu on your iPod.
4. Use the navigator buttons on your remote to browse through the menu.
5. Press the Select button on the remote to choose a menu item.
6. Press the or button will skip through the track lists. Press and hold
button to scan through the current track.
Note: Press and hold the Play/Pause button to switch off the iPod.
Refer to 'Remote control' section of this manual for controlling your iPod using the
supplied remote control.

iPod compatibility

The DD30 is able to communicate with and control the following iPod models:
iPod nano (1st, 2nd, 3rd and 4th generation)
iPod (4th generation, photo and 5th generation)
iPod classic
iPod touch (1st and 2nd generation)
iPod mini
Note: The DD30 dock station also charges your iPod when docked even when the unit
is in standby mode. This function will not work if the 'Power' on the back of the unit is
turned off.
or