Storing And Deleting Phone Numbers - Buick Regal Owner's Manual

The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Bluetooth.
3. Say List.
If the phone name you want to
delete is unknown, see Listing All
Paired and Connected Phones.
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Bluetooth.
3. Say Delete. The system asks
for which phone to delete.
4. Say the name of the phone you
want to delete.
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all available cell
phones were paired. Depending on
which cell phone you want to
connect to, you may have to use
this command several times.
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Bluetooth.
3. Say Change phone.
If another cell phone is
found, the response will be
<Phone name> is now
connected.
If another cell phone is not
found, the original phone
remains connected.
The system can store up to 30
phone numbers as name tags in the
Hands-Free Directory that is shared
between the Bluetooth and OnStar
systems.
The following commands are used
to delete and store phone numbers.
This command will store a
phone number, or a group of
numbers as a name tag.
This command allows
a phone number to be stored as a
name tag by entering the digits one
at a time.
This command is used to
delete individual name tags.
command deletes all stored name
tags in the Hands-Free Calling
Directory and the Destinations
Directory.
This