Buick LaCrosse Navigation Manual page 104

104 Infotainment System
Making a Call
Calls can be made using the following commands.
Command
Dial or Call
Digit Dial
Re dial
Using the Dial or
Call Command
1. Press / .
2. Say Dial or Call.
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Usage
The dial or call command can be used
interchangeably to dial a phone number or
a stored name tag.
This command allows a phone number to
be dialed by entering the digits one at
a time.
This command is used to dial the last
number used on the cell phone.
Using the Digit Dial Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
Clear at any time to clear the
last number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press / .
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say Dial.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re dial Command
1. Press / .
2. After the tone, say Re dial.
Once connected, the person called
will be heard through the audio
speakers.