Using Voice Recognition - Buick LaCrosse Navigation Manual

100 Infotainment System
Pair cell phone(s) to the vehicle.
The system may not work with
all cell phones. See Pairing a
Phone in this section for more
information.
If the cell phone has voice
dialing capability, learn to use
that feature to access the
address book or contact list. See
Voice Pass-Thru in this section
for more information.
See Storing and Deleting Phone
Numbers in this section for
more information.
WARNING
When using a cell phone, it can
be distracting to look too long or
too often at the screen of the
phone or the infotainment
(navigation) system. Taking your
eyes off the road too long or too
often could cause a crash
resulting in injury or death. Focus
your attention on driving.
Infotainment Controls
If equipped, the infotainment system
allows certain controls to be
selected on the infotainment display.

Using Voice Recognition

Using Voice Recognition
To use voice recognition, press the
/ button located on the steering
wheel. The system then responds
with Ready, followed by a tone.
After the tone, say a command.
For additional information say Help
while you are in a voice
recognition menu.
Pairing a Phone
1. Press / .
2. Say Bluetooth.
3. Say Pair. The system responds
with instructions and a four digit
PIN number. The PIN number is
used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturer's
user guide.
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN number that was provided in
Step 3. After the PIN number is
successfully entered, the system
prompts you to provide a name
for the paired cell phone. This
name will be used to indicate
which phones are paired and
connected to the vehicle,
see Listing All Paired and
Connected Phones after in this
section for more information.
6. Repeat Steps 1 through 5 to pair
additional phones.