Navigation Commands - Buick LaCrosse User Manual

the system to scroll forward one
page in a list.
the system to scroll back one page
in a list.
To activate the navigation voice
recognition:
1. Press / on the steering
wheel. The audio system mutes.
A voice prompt says, Please
say a command. Wait until the
tone is heard before speaking.
If there is no tone, make sure
the volume is turned up.
While voice recognition is active,
the system displays a symbol in
the top right of the screen.
2. Clearly speak the command
Navigation.
3. Clearly speak one of the
commands in this section.
Instructs The following commands only apply
once the Navigation command is
given.
Instructs
country origin to input a destination
from that region. The system will
accept United States, Canada,
or Mexico.
an address to be stated as a
one-shot method. The system
will recognize the address if
stated all at once or say a city
center. An example is to say,
200 Renaissance Street, Detroit,
Michigan or Detroit, Michigan.
address to be stated one step at a
time. The format will be State, City,
Street, then House Number.
Intersection to be stated as the
destination. The format will be
State, City, Street, then Junction.
Changes the
Allows
Allows an
Allows an
Instructs the system to start
guidance to address saved as
My Home.
When a phone is paired
to the system, which contains
Address Information stored for
contacts, the address associated
with that contact can become a
route. If the system cannot resolve
the address, an error displays.
Point of Interest to be stated as a
destination. Become familiar
with the POI categories and
sub-categories in the system by
pressing Destination from the Home
Page or DEST from the faceplate,
then selecting Point of Interest. POI
commands for Along Route and
Around Destination will be available
if route guidance is active.
Allows addition
of individual waypoints or the
destination. The system will ask
for the choice of entry method to
continue. An example is to say,
POI Along Route or Intersection.
Allows a