Changing The Source On The Video Display Screens; How To Change The Rse Video Screen Settings; Audio Output; Video Screens - Buick LaCrosse User Manual

Power for auxiliary devices is not
supplied by the infotainment system.
To use the auxiliary inputs:
1. Connect the auxiliary device
cables to the A/V jacks.
2. Turn on the power to the
auxiliary device and the RSE
video screen.
The source for the video screens
can be changed.
Press the AUX button on the remote
control:
1. To change the source of both
video screens from the DVD
player to the auxiliary device.
2. A second time to change the left
video screen source to the DVD
player and the right video screen
to the auxiliary device.
3. A third time to change the left
video screen source to the
auxiliary device and the right
video screen to the DVD player.
4. A fourth time to change the
source of both video screens to
the DVD player.
To change the screen display mode,
brightness, and language from the
remote control:
1. Press .
2. Use , , , and
select the settings.
3. Press again to exit.
Audio from the DVD player or
auxiliary inputs can be heard
through the wireless headphones or
vehicle speakers.
The RSE system transmits the
audio signal to the wireless
headphones if an audio signal is
available. See Headphones earlier
in this section.
The front seat passengers can listen
to audio from the A/V jacks through
the vehicle speakers by selecting
Rear AUX as the source on the
radio.
The video screens are in the back
of the driver and front passenger
seats.
to
To use the video screen:
1. Push the release button on the
seatback console.