Bluetooth System - Buick Regal Getting To Know Manual

Bluetooth System
®
Before using a Bluetooth-enabled device in the vehicle, it must be paired with the
IntelliLink system. Not all devices will support all functions. Bluetooth streaming audio is
available with the IntelliLink system. For more information, visit www.gm.com/bluetooth.
Pair a Phone using Voice Recognition
Voice Recognition
1. Press the
button.
2. After the beep, say "Pair." The system
will search for your phone. A four-digit
code appears on the display.
3. Start the pairing process on the phone.
Locate your vehicle name on the phone.
4. Enter the four-digit code that appears on
the touch screen or confirm a six-digit code on the phone.
5. If your phone prompts you to accept the connection or phone book download, click "yes"
and always allow.
Pair a Phone using the Screen Buttons
1. Press the CONFIG button.
2. Touch Phone Settings.
3. Touch Bluetooth.
4. Touch Pair Device. A four-digit code appears on the display.
5. Start the pairing process on the phone. Locate your vehicle name on the phone.
6. Enter the four-digit code that appears on the touch screen or confirm a six-digit code on
the phone.
7. If your phone prompts you to accept the connection or phone book download, click
"yes" and always allow.
USB Connectivity
IntelliLink System
An iPod™, iPhone™, MP3 Player, a
USB flash drive or a USB mass storage
device can be connected to the USB port.
IntelliLink will read the device, build a list
of voice commands, and fill in missing
song information and album graphics. You
can search your music on-screen or by
voice commands.
Note: Connect an iPod/iPhone USB cord after
starting the vehicle for optimum performance.
For additional information, see your Infotainment
System Owner Manual.
9