Do you have a question about the THRU-THE-WALL ELECTRONIC CONTROL AIR CONDITIONER and is the answer not in the manual?
Questions and answers
Michelle
May 15, 2025
I see black spot inside on the louvers and more. My unit has a smell when turned on. How can I clean the inside to remove the black spots? Do I need a new unit?
1 comments:
Mr. Anderson
May 22, 2025
To clean the inside of a Frigidaire THRU-THE-WALL ELECTRONIC CONTROL AIR CONDITIONER and remove black spots and odors:
1. Unplug the unit to prevent shock or fire hazards. 2. Remove the air filter by grasping it at the center and pulling up and out. 3. Clean the air filter: - Wash it with warm water and liquid dishwashing detergent. - Rinse thoroughly and shake off excess water. - Let it dry completely before replacing. - Alternatively, vacuum the filter clean. 4. Clean the cabinet and front panel: - Use a cloth dampened with warm water and mild liquid detergent. - Rinse and wipe dry. - Do not use harsh cleaners, wax, or polish. - Avoid excess water near the controls.
This process helps remove trapped particles that could cause odors and black spots, such as mold or mildew.
This answer is automatically generated
Related Manuals for Frigidaire THRU-THE-WALL ELECTRONIC CONTROL AIR CONDITIONER
USE & CARE MANUAL READ AND SAVE THESE INSTRUCTIONS THRU-THE-WALL ELECTRONIC CONTROL AIR CONDITIONER P/N 309000856/03...
Page 2
Your product is protected by this warranty Your appliance is warranted by Electrolux. Electrolux has authorized Frigidaire Consumer Services and their authorized servicers to perform service under this waranty. Electrolux authorizes no one else to change or add to any of these obligations under this warranty. Any obligations for service and parts under this war- ranty must be performed by Frigidaire Consumer Services or an authorized Frigidaire servicer.
Model No. Serial No. Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company. Warranty Product Registration Normal Sounds Important Safety Instructions...
If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass first. If the window is a triple-track type with a screen panel included, remove the screen completely before installation.
Air Conditioner Features RAISES TEMPERATURE OR TIME SELECT FAN SPEEDS LOWERS TEMPERATURE OR TIME SETS MODE TURNS UNIT ON OR OFF Temp/Timer ADJUSTS TEMPERATURE OR TIME Temp/Timer SETS Cool Energy MODE Saver Auto Sleep Temp Star t ACTIVATES REMOTE Remote...
Air Conditioner Features TO TURN UNIT ON: Temp/Timer Auto Temp Sleep Heat Cool Speed Energy Saver Fan Only Temp/Timer Remote Sensing Mode Timer TO CH A NG E TEM PER ATU R E SETTING : Temp/Timer Auto Temp Sleep Heat...
Air Conditioner Features (continued) TO OPERATE ON FAN ONLY: Temp/Timer Auto Temp Check Sleep Heat Cool Speed Energy Saver Fan Only Temp/Timer Remote Sensing Mode Timer Note: Use this function only when cooling is not desired, such as for room air circulation.
Page 8
Air Conditioner Features SLEEP FEATURE: Temp/Timer Auto Temp Check Sleep Heat Cool Speed Energy Saver Fan Only Temp/Timer Remote Sensing Mode Timer The Sleep Mode can be selected with a Heating or Cooling Mode. Note: In this “MODE” the selected cooling temperature will increase by 2 degrees F, 30 minutes after the mode is selected.
Page 9
Auto Temp Heat Cool Speed Energy Saver Fan Only Temp/Timer Mode If the display reads “AS”, a sensor has failed. Contact your Authorized Frigidaire Service Center TO TURN UNIT OFF: Temp/Timer Auto Temp Check Sleep Heat Cool Speed Energy Saver...
Plug in air conditioner. Winter Storage If you plan to store the air conditioner for the winter, cover it with plastic or return it to the original carton. NOTE: To prevent rust or electrical connections from being damaged, store air conditioner in an upright position and a dry place.
Window vibration poor installation. Refer to installation instructions or check with installer. Improper installation. Tilt air conditioner slightly to the outside to allow water drainage. Refer to installation instructions check with installer. Unit removing large quantity of moisture from humid room. This is normal during excessively humid days.
Need help?
Do you have a question about the THRU-THE-WALL ELECTRONIC CONTROL AIR CONDITIONER and is the answer not in the manual?
Questions and answers
I see black spot inside on the louvers and more. My unit has a smell when turned on. How can I clean the inside to remove the black spots? Do I need a new unit?
To clean the inside of a Frigidaire THRU-THE-WALL ELECTRONIC CONTROL AIR CONDITIONER and remove black spots and odors:
1. Unplug the unit to prevent shock or fire hazards.
2. Remove the air filter by grasping it at the center and pulling up and out.
3. Clean the air filter:
- Wash it with warm water and liquid dishwashing detergent.
- Rinse thoroughly and shake off excess water.
- Let it dry completely before replacing.
- Alternatively, vacuum the filter clean.
4. Clean the cabinet and front panel:
- Use a cloth dampened with warm water and mild liquid detergent.
- Rinse and wipe dry.
- Do not use harsh cleaners, wax, or polish.
- Avoid excess water near the controls.
This process helps remove trapped particles that could cause odors and black spots, such as mold or mildew.
This answer is automatically generated