BACtrack ELEMENT Owner's Manual page 10

START
Error Notification
STEP 4: When the countdown reaches
zero, "START" will flash and the screen
will display three lines. Blow through the
BAC
mouthpiece for five seconds until there is
a double beep sound.
STEP 5: Once the sensor has analyzed
the breath sample, the estimated BAC
value is displayed.
BAC
If a user does not blow a sufficient breath
sample, the LCD will display "FLo".
Press start to restart the countdown
cycle and retest.
BAC
If there is no breath sample blown within
15 seconds, the LCD will display "Out".
Press start to restart the countdown cycle
and retest.
BAC
If the unit is powered on outside of the
acceptable temperature range (0-40 °C or
32-104 °F) the unit will display Out°F and
testing cannot be performed.
BAC
If the battery indicator display is empty,
install two new alkaline AAA batteries.
BAC
8