Recording A Path - Brookstone Rover User Manual

RecORdINg A PAtH

The Rover can record up to 30 seconds of a driving route, and then repeat it all
by itself!
1 . To record a path, press the Make Path button and drive the Rover on the
route you want to record .
2 . After you complete your route, press the Make Path button again to save .
3 . Press the Play Path to play the recorded route and the Rover will
automatically drive the route you recorded – all by itself .
Note: If the Rover is reset, or the batteries are removed, the saved route
will be erased.
18